DVR User Manual For H.
DVR User Manual CAUTION Please read this user manual carefully to ensure that you can use the device correctly and safely We do not warrant all the content is correct. The contents of this manual are subject to change without notice This device should be operated only from the type of power source indicated on the marking label. The voltage of the power must be verified before using the same. Kindly remove the cables from the power source if the device is not to be used for a long period of time.
DVR User Manual Table of Contents 1 Introduction ................................................................................................................................................ 1 1.1 DVR Introduction ............................................................................................................................................................. 1 1.2 Main Features ....................................................................................................................
DVR User Manual 4.2.1 Live ....................................................................................................................................................................................................... 19 4.2.2 Main Monitor ......................................................................................................................................................................................... 20 4.2.3 Spot ...............................................................
DVR User Manual 4.7 User Management Configuration ................................................................................................................................... 36 4.8 P.T.Z Configuration ........................................................................................................................................................ 38 4.9 Advanced.......................................................................................................................................
DVR User Manual 7.1.2 On WAN................................................................................................................................................................................................ 50 7.2 Remote Surveillance through Apple PC ........................................................................................................................ 52 7.2.1 On LAN .............................................................................................................
DVR User Manual 1 Introduction 1.1 DVR Introduction This model DVR (Digital Video Recorder) is designed especially for CCTV system. It adopts high performance video processing chips and embedded Linux system. Meanwhile, it utilizes many most advanced technologies, such as standard H.264 with low bit rate, Dual stream, SATA interface, VGA output mouse supported, IE browser supported with full remote control, mobile view(by phones), etc., which ensure its powerful functions and high stability.
DVR User Manual RECORD & PLAYBACK Record modes: Manual, Schedule, Motion detection and Sensor alarm recording Support recycle after HDD full Resolution, frame rate and picture quality are adjustable 128MB for every video file packaging 4 audio channels available Two record search mode: time search and event search Support 8/16 screen playback simultaneously Support deleting and locking the recorded files one by one Support remote playback in Network Client through LAN or internet ALARM 1
DVR User Manual Support event log recording and checking, events unlimited NETWORK Support TCP/IP, DHCP, PPPoE, DDNS protocol Support IE browser to do remote view Support setup client connection amount Support dual stream. Network stream is adjustable independently to fit the network bandwidth and environment.
DVR User Manual 2 Hardware Installation Notice: Check the unit and the accessories after getting the DVR. Please don‟t power up the unit till the physical installation is complete. 2.1 Install Hard Drive &DVD Writer 2.1.1 Install Hard Drive Notice: 1. This series supports two SATA hard drives. Please use the hard drive the manufacturers recommend specially for security and safe field. 2. Please calculate HDD capacity according to the recording setting.
DVR User Manual 2.1.2 Install DVD Writer Notice: 1. The writers must be the compatible devices we recommend. Please refer to “Appendix C Compatible Devices” 2. This device is only for backup. Step1: Unscrew and Open the top cover. Step2: Connect the power and data cables. Place the DVD writer onto the bottom case as Fig2.3. Step3: Screw the DVD writer as Fig2.4 Fig 2.3 Connect the DVD Writer Fig 2.4 Screw the Writer 2.
DVR User Manual Item Type 2 Compound button 3 Digital button 4 Input button 5 IR receiver 6 USB Name Description MENU/+ BACKUP/RECORD/FOCUS REW/SPEED SEARCH/ZOOM PLAY /IRIS FF/ P.T.Z. STOP/ESC 1-9 1. Enter menu in live 2. Increase the value in setup 1. Decrease the value in setup 2. Enter backup mode in live 1. Record manually 2. FOCUS function enables at PTZ mode. 1. Rewind key 2. SPEED function enables at PTZ mode 1. Enter search mode 2.ZOOM function enables at PTZ mode. 1.
DVR User Manual Fig 2.5 Rear Panel for 8-ch Item Name 1 2 3 4 5 6 7 8 9 10 Power switch DC 12V P/Z K/B Alarm out GND Alarm in Audio in Audio out CVBS port 11 Spot 12 13 Video in HDMI port 14 USB port 15 16 LAN VGA port Description Turn on/off the power supply. Power input Connect to speed dome Connect to keyboard 1-ch relay output. Connect to external alarm.
DVR User Manual Fig 2.6 Rear Panel for 16-ch Item Name 1 2 3 4 5 6 7 8 9 10 Power switch DC 12V P/Z K/B Alarm out GND Alarm in Audio in Audio out CVBS port 11 Spot 12 13 Video in HDMI port 14 USB port 15 16 LAN VGA port Description Turn on/off the power supply. Power input Connect to speed dome Connect to keyboard 1-ch relay output. Connect to external alarm.
DVR User Manual 2.4 Remote Controller It uses two AAA size batteries. Open the battery cover of the Remote Controller. Place batteries. Please take care of the polarity (+ and -). Replace the battery cover. Fig 2.6 Remote Controller Item 1 2 3 4 5 6 7 8 Name Power Button INFOR Button REC Button Digital Button Multi Screen Button SEARCH Button MENU Button ENTER Button Function Switch off - to stop DVR. Use it before turning off the power.
DVR User Manual Item 9 10 11 12 13 14 15 Name Direction Button +/- Button Playback Control Button AUDIO Button Auto Dwell Button BACKUP Button PTZ Control Button Function Move cursor in setup or pan/tilt PTZ To increase or decrease the value in setup To control playback, Fast forward/rewind/stop/single frame play To enable audio output in live mode To enter into auto dwell mode To enter into backup mode To control PTZ camera: Move camera/zoom/focus/iris/speed control Note: Key points to check in case the
DVR User Manual You can check the device ID of a DVR from System SetupBasicDevice ID. You can also set multiple DVRs with the same device ID however this can cause interference if the DVRs are kept close to each other. 2.5 Control with Mouse 2.5.1 Connect Mouse It supports USB mouse through the ports on the rear panel. Notice: If mouse is not detected or doesn't work, check below steps: 1. Make sure the mouse is plugged in the USB mouse port not the USB port on the front panel. 2.
DVR User Manual Fig 2.7 Digital Numbers and Letters Input Window It supports mouse drag. For e.g. setting up motion detection area, click customized, hold down the left button and drag to set motion detection area. Setting up Schedule: hold left button and drag to set schedule time. In Playback: Click to choose the options. Right click to return to live mode. In Backup: Click to choose the options. Right click to return to previous picture.
DVR User Manual 3 Basic Function Instruction 3.1 Startup & Shutdown Please make sure all the connections are done properly before you power on the unit. Proper startup and shutdown are crucial to expanding the life of your DVR. 3.1.1 Startup Step1: Connect with the source power. Step2: The device will boot and the power LED would turn blue. Step3 A WIZZARD window will be pop-up and show some information about time zone,time setup,network configuration, record configuration and disk management.
DVR User Manual Step3: Disconnect the power 3.2 Login User can login or log off the DVR system. Once logged off the user cannot do any other operation except changing the multi-screen display. Notice: The default user name and password is “admin” and 123456” For complete operational steps for changing password, adding or deleting users, please refer to section 4.7 User Management Configuration. Fig 3-1 Login 3.
DVR User Manual Fig 3-3 Live Playback 15
DVR User Manual 4 Main Menu Setup Guide Right click or press ESC button on the front panel to display the menu toolbar on the bottom of the screen. Refer to Fig 4-1: Fig 4-1 Main Menu Toolbar Click the icon beside the screen display mode to display a channel select dialog. 6/8/13 channels can realize single channel big screen. Images can drag to any place to display in the live interface. Click the icon beside the playback icon to select the time to playback.
DVR User Manual Fig 4-2 System Setup 4.1 Basic Configuration Basic configuration includes three sub menus: system, date & time and DST. 4.1.1 System Step1: Enter into MenuSetupBasicSystem. Refer to Fig 4-3: Step2: In this interface you can setup the device name, device ID, video format, max network user, VGA resolution and language.
DVR User Manual Max Online Users: To set the maximum number of concurrent user logins in the DVR. Show wizard: If selected, the GUI would launch the startup wizard on every boot, allowing the user to do basic setup. VGA resolution: The resolution of live display interface, ranges from: CVBS, VGA800*600, VGA1024*768, VGA1280*1024 and HDMI. Note: Switching between HDMI/VGA and CVBS will change the menu output mode. Please connect to relevant monitor. Language: To setup the menu language.
DVR User Manual 4.2 Live Configuration Live configuration includes four submenus: live, main monitor, spot and mask. 4.2.1 Live In this interface, user can setup camera name, adjust colors: brightness, hue, saturation and contrast. Step1: Enter into MenuSetupLiveLive tab. Refer to Fig 4-6: Note: A soft keyboard will pop up by clicking the camera name. User can self-define the camera name.
DVR User Manual 4.2.2 Main Monitor Step1: Enter into MenuSetupLiveMain Monitor tab. Refer to Fig 4-8: Step2: Select split mode: 1×1、2×2、2×3、3×3、4×4 and channel. Click button to setup the previous channel group. Click button to set the latter channel group. Step3: Set the dwell time. Step4: Click “default” to restore default setting; click “apply” to save the setting; click “exit” to exit current tab. Fig 4-8 Live Configuration-Host Monitor 4.2.3 Spot Step1: Enter into MenuSetupLiveSpot tab.
DVR User Manual setting. Fig 4-10 Live Configuration-Mask Setup Mask Area Live Image Mask Area 4.3 Record Configuration Record configuration includes six sub menus: enable, record bit rate, time, recycle record, stamp and snap.
DVR User Manual 4.3.1 Enable Step1: Enter into MenuSetupRecordEnable tab. Refer to Fig 4-11: Parameter Record Audio Meaning To enable/disable recording for the channel To enable/disable audio recording for the channel Fig 4-11 Record Configuration-Enable Step2: Checkmark record and audio. Step3: Select All to setup the same settings for all channels. 4.3.2 Record Bitrate Step1: Enter into MenuSetupRecordRecord Bitrate tab.
DVR User Manual Parameter Rate Resolution Quality Encode Max bit stream Meaning Range from: 1-30(NTSC)1-25(PAL) Support CIF , HD1, D1 The higher the value is, the clearer the recorded image is. Six options: lowest, lower, low, medium, higher and highest. VBR and CBR Range from: 256kbps~2Mpbs Fig 4-12 Record Configuration-Record Bitrate 4.3.3 Time Step1: Enter into MenuSetupRecordTime interface. Refer to Fig 4-13: Pre-alarm record time: The record time prior to actual triggering of an alarm i.e.
DVR User Manual Stamp:This provides an option to enable or disable the Camera Name and the Time stamp on the video. You can also choose a position for the stamp on the screen. Step1: Enter into MenuSetupRecordStamp tab. Refer to Fig 4-14: Step2: Checkmark camera name and time stamp; click Setting button. User can use cursor to drag the camera name and time stamp at random positions, referring to below Figures: Step3: Select “All” to setup all channels with the same parameters.
DVR User Manual 4.3.6 Snap In this interface, user can set up Resolution, quality, snap interval, snap number. 4.4 Schedule Configuration Schedule configuration includes three sub menus: schedule, motion and alarm. 4.4.1 Schedule This tab allows defining schedule for normal recording for seven days of a week, 24 hours of a day. Every row denotes an hourly timeline for a day. Click the grid to do relevant setup. A highlighted area denotes selected timeline. Step1: Enter into MenuSetupSchedule tab.
DVR User Manual 4.4.2 Motion This tab allows to setup schedule for motion based recording. Step1: Enter into MenuSetupScheduleMotion tab. Refer to Fig 4-17: Step2: The setup steps for schedule for motion based recording are similar to normal schedule setup. You can refer to 4.4.1 Schedule for details. Note: The default schedule of motion based recording is 24x7, that is, the color of schedule settings interface is dark blue. This enables motion based recording for 24x7.
DVR User Manual 4.5 Alarm Configuration Alarm configuration includes five sub menus: sensor, motion, video loss, other alarm and alarm out. 4.5.1 Sensor Sensor includes three sub menus: basic, alarm handling and schedule. Operate the following steps to configure sensor alarm: Step1: Enter into MenuSetupAlarmSensorBasic tab. Refer to Fig 4-19: Step2: Enable channels by checking the checkboxes beside the desired channels. Step 3: Set the alarm type according to triggered alarm type.
DVR User Manual Step 6: Enter into alarm tab to select the options to handle alarm. Buzzer: If selected, the local inbuilt buzzer would be activated on an alarm. Full screen alarm: If selected, there will pop up the chosen channel on the monitor on an alarm trigger. To alarm out: If selected, this would trigger the external relay output on detecting a sensor based alarm.
DVR User Manual Step1: Enter into MenuSetupAlarmMotion tab. Refer to Fig 4-23: Step2: Enable motion alarm, set alarm hold time which refers to the time till which the system will wait for further detection of motion. Eg. If the holding time is set to 10 seconds, once the system detects a motion, it will go into alarm but would not detect any other motion alarm (specific to channel) until 30 seconds.
DVR User Manual the trigger, you will not see the result of motion based alarm if no schedule is added. If you have set the schedule for senor based recording in the same timeline, recordings can also be triggered. 4.5.3 Video Loss Step1: Enter into MenuSetupAlarmVideo Loss tab. Refer to Fig 4-26: Step2: The setup steps of video loss trigger are similar to alarm handling. You can refer to Chapter 4.5.1 Sensor alarm handling for more details.
DVR User Manual Alarm out includes three sub menus: alarm out, schedule and buzzer To setup alarm out: Step 1: Enter into MenuSetupAlarm out tab. Refer to Fig 4-28. Input relay name and hold time. Step 2: Select the Schedule tab. This will bring up the schedule setup interface. The setup steps for schedule for alarm out are similar to normal schedule setup; you can refer to 4.4.1 Schedule for details. This step is very important for alarm out.
DVR User Manual http://192.168.0.25:82 in IE browser. Server port: Communication port. Step 3: Connect internet. If you have a DHCP server running and would like your DVR to automatically obtain an IP address and other network settings from that server, check the checkbox beside "Obtain an IP address automatically". Then the device will distribute IP address, subnet mask, and gateway IP and DNS server.
DVR User Manual 4.6.3 Email Step 1: Enter into MenuSetupNetworkEmail tab. Refer to Fig 4-31: SMTP Server/Port: The name and port number of SMTP server. Check the SSL checkbox if the server requires a secure connection (SSL); user can setup mail servers (such as Gmail) as required. Send address/password: Sender‟s email address/password Receive address: Receiver‟s email address. Here user can add at least three mail addresses. Click TEST button to test the validity of the mailbox.
DVR User Manual 4.6.5 Other Settings If your DVR is setup to use PPPoE as its default network connection, you may setup DDNS to be used in connection. The setting steps are as follows: Step 1: Select Other Settings tab. Enable DDNS server. Step2: Select DDNS server. Step 3: Input user name, password and host domain name registered in the DNS website (See the following example). Step 4: Click TEST to test the effectiveness of the relevant information. Step 5: Click “apply” button to save the settings.
DVR User Manual Step 3: Click “Add to cart”. Then Dynamic DNS Hosts dialog box will be displayed. Step 4: Create user account. For example, the username is “bcd”, password is “123456”. Click” Create Account” button to create user account. After that, you shall provide your card number, card expiration and security code as well as billing address. Finally click “sign up for trial” button. Now, according to the domain name registration of “DDNS”,the domain name for DVR is “abc.dyndns.
DVR User Manual Connect DVR via network: Step 1: Enter into Main menuNetworkother settings, checkmark DDNS, select “Dyndns” at the DDNS Sever pull down list box and input user name and password. Step 2: Enter into configuration interface of the router to map the server port and IP address (if the user enables UPnP function, he can skip this step). Click Save button to save the setting Step 3: Login IE browser and input registered domain name “http://www.abc.dyndns.tv” to connect DVR.
DVR User Manual Fig 4-34 User Management Configuration Fig 4-35 Add-General Step 5: Select Authority tab and then assign the operation rights for particular user. Refer to fig 4-36. Fig 4-36 Add User-Authority If you want to delete the user, please select the user you want to delete in the user list box and then click “Delete” button. If you want to modify the user, please select the user you want to modify in the user list box and then click “Setup” button to modify its general information and authority.
DVR User Manual 4.8 P.T.Z Configuration P.T.Z configuration includes two submenus: serial port and advanced settings. Serial port settings are as follows: Step 1: Enter into MenuSetup P.T.Z Serial port tab. Refer to Fig 4-37: Step 2: Select “enable” and setup the value of address, baud rate and protocol according to the settings of the speed dome. Step 3: Configure all channels with the same parameters by selecting the “All” box and then doing the relevant setup. Fig 4-37 P.T.
DVR User Manual Advance settings are as follows: Step 1: Enter into MenuSetup P.T.Z Advanced tab. Refer to Fig 4-38: Step 2: In the Advanced tab, click preset “Setting” button to see a dialog box as Fig 4-39: Fig 4-38 P.T.
DVR User Manual Click Add button to add cruise line in the list box (max 8 cruise line can be added); select a cruise line and click Setup button to see a dialog box as Fig 4-42: Click Add icon to set the speed and time of preset point; select a preset point and then click Delete icon to delete that preset point; click Modify icon to modify the setting of a preset point. User can click icons to adjust the position of preset point.
DVR User Manual 4.9 Advanced Advanced configuration includes three submenus: Reset, Import/Export and Block/Allow list. 4.9.1 Reset This would reset the system to factory defaults and reboot the DVR. 4.9.2 Import/Export User can export the data files into mobile storage devices as backup and can also import specified data files from mobile storage device to DVR. 4.9.
DVR User Manual 5 Search,Playback & Backup Search configuration includes four submenus: time search, event search, file management and image. 5.1 Time Search Step1: Enter into MenuSearch Time search tab. Refer to Fig 5-1: Fig 5-1 Search Configuration-Time Search Step2: Select date and channels on the right hand side and press “Search” button. A date with highlighted borderline indicates presence of data.
DVR User Manual Step4: Select the channel display mode and click button to play record. Use the playback toolbar to control the playback. Playback Buttons Note: When the monitor resolution is set to VGA800*600, Part of the time search interface will be hidden. Click the “Expand to” button to expand the whole interface. The method of record backup during a certain period in the playback interface: Select the start time by dragging the slider and click record period. Next, click icon.
DVR User Manual Fig 5-2 Search Configuration-Event Search Step 2: Select date and channels on the right hand side. A data with highlighted borderline indicates presence of data. Step 3: Then checkmark Motion, Sensor or All accordingly. You can search for motion based recording and sensor based recording. Step 4: Press “Search” button to display the searched event information in the event list box. Step 5: Double click the event item to play the record. 5.
DVR User Manual Fig 5-3 Search Configuration-File Management Lock: Select a file and click Lock button to lock this file. Once locked, the file cannot be deleted. Unlock: Select a locked file and click Lock button to unlock this file Delete: Select an unlocked file and click Delete button to delete this file. Step 4: Use “All” button to lock/unlock or delete all files in the file management column. Step 5: Double click an unlocked item to playback. 5.
DVR User Manual Please refer to 4.5 Alarm Configuration for details. 5.5 Backup This unit supports backup by built-in SATA DVD Writer or USB flash drive. User also can make backup by IE browser via internet. Refer to 7.3.2 Remote backup. Step1: Enter into main menu Backup interface.
DVR User Manual 6 Manage DVR 6.1 Check System Information Check system information includes six submenus: system, event, log, network, online user and record information. 6.1.1 System Information In this tab, user can check the hardware version, MCU version, kernel version, device ID, etc. 6.1.2 Event Information In this tab, you can search for events like motion, sensor and video loss. The utility provides an interface to have a date based and a channel based search.
DVR User Manual Disconnect: Disconnect the online users to access DVR. If this function is used by the admin, the particular PC will not be able to access the device for five minutes. . 6.1.6 Record Information In this tab, a user can check resolution, ftp and record status including sensor based recording, motion based recording, manual recording or schedule recording. 6.2 Manual Alarm In this tab, user can trigger a manual alarm. 6.3 Disk Management 1.
DVR User Manual 6.4 Upgrade The DVR can be upgraded by using USB flash drive. Get the upgrading software from your vendor when there is a new software version. Upgrade Steps: Step 1: Copy the upgrade software which gets from vendor into the USB storage device Step 2: Connect the USB flash drive to the USB port. Step 3: Enter MenuUpgrade tab. Then the upgrade software name would be displayed in the upgrade list box. Step 4: Select that software and then click upgrade button. It will upgrade automatically.
DVR User Manual 7 Remote Surveillance 7.1 IE Remote Surveillance In order to view the DVR from a network it must be connected to a LAN/WAN or internet. The network setup should be done accordingly. Please refer to 4.6 Network Setup. This DVR supports IE browser, on Windows XP and Vista platform. 7.1.1 On LAN Step 1: Enter into the DVR‟s Main MenuSetupNetwork tab to input IP address, Subnet Mask, etc .If using DHCP, please enable DHCP in both the DVR and the router.
DVR User Manual Step 3: Open IE browser, input IP address, or dynamic domain name and enter. If HTTP port is not 80, add the port number after IP address or domain name. Step 4: IE will download ActiveX automatically. Then a window pops up and asks for user name and password. Input name and password correctly, and enter to view. Note: If you cannot download and install ActiveX, please refer to FAQ Q8. Fig 7-1 View with IE Browser 2. Connect the DVR to internet through PPPoE directly.
DVR User Manual Step 4: The following setting steps are as the same as Step3 and Step4 in Point 1. 7.2 Remote Surveillance through Apple PC Note: Because the current plug-in version of client end just only supports 32-bit mode, so the safari browser shall start 32-bit mode. If the browser is the earlier MACOS version, the default setting is 32-bit mode and the setting can be skipped. The Setting steps are as follows: First: Right click safari icon and select “Show in Finder”.
DVR User Manual 7.2.1 On LAN Step 1: After starting Apple computer, click Apple icon. The following window will pop up. Please select “System Preferences””Internet &Wireless”click “Network” Step 2: Enter into Network interface and then click “Ethernet Connected” to check the internet connection of Apple PC.
DVR User Manual Step 3: After acquiring the IP address, Subnet Mask and so on, please enter into the DVR‟s Main MenuSetupNetwork interface to manually input IP address, Subnet Mask and Gateway according to the configuration of PC. The network segment should be the same as the PC. If using DHCP, please enable DHCP in the DVR and router. Step 4: After finishing the above information, users can enter LAN IP and http port in the Safari browser. For example: input http://192.168.1.100:81(here 192.168.1.
DVR User Manual button,the following window will pop up: Input the name and password of Apple PC and then click “OK” to install this Active X control. Step 6: After finishing installing the Active X control, please quit from the Safari browser. Right click Safari icon on the desktop and then select “Quit” button to quit the browser. Then restart Safari browser. Input the IP address and http port to enter into the login interface of DVR. 7.2.2 On WAN There are also two ways for DVR to connect to Internet.
DVR User Manual 7.3 Remote Preview Fig 7-2 Remote Live Preview Symbol and function Definitions: ① ④ ⑦ ⑩ Channel indicator Snapping picture Bidirectional talk PTZ control ② ⑤ ⑧ ⑪ Screen display mode Start manual record Playback Master/sub stream status ③ ⑥ ⑨ Volume Start IE record Color Note: click button to record manual and the record file will be saved in user’s PC.
DVR User Manual Click the icon beside the screen display mode, channel select dialog will appear as below: Take 8-channel view for example: user can checkmark 8 channels form 1-ch to 16-ch at random to display the live pictures, A maximum of 16 channels can be selected. Then click OK button to confirm the setting.
DVR User Manual and zoom, focus and set the presets, etc. Buttons definition: Buttons Description means the dome rotate up. means the dome rotate up left. means the dome rotate up right means the dome rotate down. means the dome rotate left down. means the dome rotate right down. means the dome rotate left. means the dome rotate right. means the dome stop rotating. Drag the scroll bar to adjust rotating speed of the dome. 'Iris' button. Click button near 'Iris' button to increase light of the dome.
DVR User Manual Fig 7-4 Right Key Sub Menu Stream: This DVR supports master stream and sub stream. Master stream has higher frame rate, max 25 fps(PAL)/30 fps (NTSC) for every channel, but it needs higher network bandwidth; second stream has low frame rate, max 6FPS (PAL) /7FPS(NTSC) for every channel, but it requires low network bandwidth as compared to the master stream. Therefore, users can select the stream according to their bandwidth.
DVR User Manual Fig 7-5 Play Record File Interface This DVR supports remote time search, event search and file management. By Time Search: Step1: Enter into SearchTime search.
DVR User Manual Fig 7-6 Time Search Interface Step2: The highlight date in the area② indicates recorded data. Select the date in the area ② and record channels in area③ Step3: Click “Search” button. The record data will be displayed in the data information list box; Step 4: Set the Start time and display mode in the area① as required Step 5: Click “play” button to playback Step 6: Click the relevant buttons in the interface for operation, like FF, pause, change channel mode, research, etc.
DVR User Manual Fig 7-7 Playback by Event Search By Event Search: Step1: Enter into SearchEvent Search.
DVR User Manual Fig 7-8 Event Search Interface Step 2: Click the highlight date and select record channels. Step 3: Checkmark the event type: motion and sensor. Step 4: The events will be display in the event list box by clicking Search button. Step 5: Double-click certain item to playback File Management Step 1: Enter into SearchFile management. Refer to Fig 7-9: Step 2: Select highlighted date and channels. Step 3: Click “Search” button to search the recorded files.
DVR User Manual Fig 7-9 File Management Interface Lock: Select certain file item in the file list box and then click “Lock” button to lock this file that ca not be deleted or overlaid Unlock: Select a locked file and then click “unlock” button to unlock this file Delete: Select an unlock file and then click “delete” button to delete this file from file list 7.4.2 Remote Backup Click Backup button to enter into backup interface.
DVR User Manual Fig 7-10 Remote Backup Interface Step1: Select channels, set the start and end time and then click “search‟ button to display the file information in the file list box Step2: Select backup files and click “browse” button to set the path. Then click “backup” button to start backup. The backup files will be saved on user‟s PC. 7.
DVR User Manual Fig 7-11 Remote System Configuration The sub menu list and the options in every menu are similar to that of the DVR. Please refer to Chapter 4 Main Menu Setup Guide for more details. 7.6 Tools Click on tool‟s tab to access the disk management tool. You can view the status of the HDD, change/view the read/write properties and can also format the HDD remotely. 7.
DVR User Manual of the DVR. Please refer to Chapter 6 System information for more details. Fig 7-12 Remote Information Search Note: There may be slight differences with respect to functions of remote surveillance between through IE and through Apple PC. Here we only take IE remote access for example.
DVR User Manual 8 Mobile Surveillance This DVR supports mobile surveillance by phones with Windows mobile, symbian, android, Iphone and Blackberry OS. At the same time, it supports 3G network. We tested Dopod D600 (WM5) and Dopod S1 (WM6), which work fine with the DVR. If you want to make mobile surveillance, please enable network service on the DVR first and refer to Chapter 4.6 Network configuration. The below is the use instructions on mobile client end for five OS. 8.
DVR User Manual to log on the server. Refer below picture in the left: Step6:Camera 1 is the default channel after login. Change the channel in rolling-down menu of “Channel”. Refer below picture in the right: Notice: User name and password here are the same with that used on the DVR. The default is admin and 123456. 8.2 By Phones with Symbian OS Please use the smart phones with symbian version supported by this unit.
DVR User Manual Step2:Input the DVR server‟s IP address in a new-built bookmark. Click this bookmark to connect to the DVR. Refer picture in the left: Step3:A welcome window will pop up and requires a package. Click the software name to download. Refer picture in the right: Step4:A security windows will pop up after downloading and ask if install the package. Click YES to install. Step5:A Scam shortcut icon appears on the system menu after finished. Step6:Run Scam program.
DVR User Manual Step9:Enter Live View, it will connect the server and display pictures. Refer picture in the left: Notice: User name and password here are the same with that used on the DVR. The default is admin and 123456. Step10:In Live View, users can snap pictures, change channels and control PTZ. Refer picture in the right: 8.3 By Phones with Iphone OS 1. Install through Iphone. Step 1. Open App Store function of Iphone. Step 2. Enable “search” function to search “Superlive”.
DVR User Manual Step 3: Click Superlive-pro, enter into “introduce” interface and then click “FREE”, it will change into “INSTALL” Step 4: Input iTunes Store password and then click “OK”. The software will be installed automatically.
DVR User Manual Note: If it is the first time for user to operate, please enter user ID; if there is no Store account, user needs to apply for one. 2. Install through PC.
DVR User Manual Step 3: Enable “search” function to search “Superlive-Pro” Step 4: Click “free application” button Step 5: Input apple ID and password, then click “acquire” Step 6: Checkmark “synchronously apply program” and “Superlive-pro”, and then click “apply” button Operation Instruction for Superlive-Pro 1.
DVR User Manual Enter server‟s IP address (or domain name), user name and password Click “Remember server” to save the setting; click button can quick input saved server address, user name and password. 2.
DVR User Manual Cruise 3. Upward rotates the PTZ Downward rotates the PTZ Leftward rotates the PTZ Rightward rotates the PTZ Stop rotating the PTZ Zoom In/Focus In/Iris Add Zoom Out/Focus Out/Iris Sub To enter into the next interface To return to the previous interface Preset select the preset point Set the cruise line Speed Rotate speed of the PTZ Image View After the image is snapped, you can click icon to enter into the image view interface.
DVR User Manual 4. Click Playback icon to enter into the playback interface. Then click „Search‟ button, select the time and channel to playback and click button. Now you can see the local file list. Select a file and click play button to playback. You can also copy or delete the file. Finally, click „Close‟ button to return to the previous interface. You can also search file to playback through time search, event search and remote file search. Please click the related button.
DVR User Manual 5. Server list Click button to enter into server list interface. You can click icon to add a server list. After you add the list, you can click edit the server information and click icon to icon to delete this server information. 6. Configuration interface Click icon to enter into Settings interface. You can set many properties, such as local, basic, live, record, schedule, alarm, network, etc. Please see chapter four in respect of setting steps for more details.
DVR User Manual 7. Information View Interface Click icon to enter into information view interface. You can check the information of system, network and online users. In the system interface, you can see the information of device name, device ID, hardware version, MCU version and so on. In the network interface, you can see the information of http port, server port, IP address, gateway, network status, etc. In the online users interface, you can see the information of the current online users. 8.
DVR User Manual Step 3: press “Install” button Step 4: click “OK” button Step 5: user can view the download and install process in notifications; Once finishing downloading, the software will install automatically.
DVR User Manual Enter into server‟s IP address (or domain name), user‟s ID and password. Click “Remember server” to save the setting; click button can quick input saved server address, user name and password.
DVR User Manual Live view Screen mode Single display Four display Snap PTZ Talk Record Live audio Hide Stop playing Image view The first picture The previous picture Next picture The last picture Zoom in Zoom out Delete 82 channel channels
DVR User Manual Record playback Play/Pause Stop Fast forward Slow play Click Playback icon in the Main Menu interface to enter into the playback interface. First, choose channel. Second, select the record file and click it to playback. Finally, click „Return‟ button to return to the previous interface.
DVR User Manual If Audio alarm is enabled, when Video Loss/Sensor/Motion happen , sound alarm will be Alarm setting Storage setting Display setting triggered; If shake Alarm is enabled, when Video Loss/Sensor/Motion happen , shake alarm will be triggered. User can setup the relevant parameters of mobile video. This function can be valid only insert SD card. User can setup display order or display mode. Information view 8.
DVR User Manual 1. Open the browser of BlackBerry phone and enter sever address 2. Click “Supercam” to link 3. Click “Download” button on the popup interface and the download progress will be shown. 4. Finished downloading, the software will be installed automatically. Note: If the software fails to download, please check in accordance with the following steps: 1. Check whether the network of mobile phone is normal or not 2. Check whether DVR server connect network normally or not 3.
DVR User Manual Note:When user used the Supercam software in mobile phone with touch screen, there will be compatible problem. Solution: Enter into Options Menu->Advance options->Applications->Supercam and click “Disable Compatibility” button. This problem will be solved. Login Enter server‟s IP address (or domain name), user‟s ID and password. Click “Remember server” to save the setting; click button can quick input saved server address, user name and password.
DVR User Manual Live view Note: User can click Return button on the Blackberry phone to return the previous interface.
DVR User Manual Mark 1 Current viewing channel Channel status Switch channels PTZ, click to switch to Fig 2 interface Snap Full screen Background Preset Mark 2 alarm Stop rotating the PTZ Upward rotates the PTZ Downward rotates the PTZ Leftward rotates the PTZ Rightward rotates the PTZ Zoom In/Focus In/Iris Add Zoom Out/Focus Out/Iris Sub Select the preset point Group Server list 88 Set the cruise line
DVR User Manual Software configuration Information view 89
DVR User Manual Appendix A FAQ Q1. Why the DVR doesn’t turn on even after connecting to the power? a. The power adapter could have gone bad. Please change a new power adapter b. The power from the adapter may be not enough for operating the DVR. Please use the power adaptor supplied along with the DVR. c. It could be a hardware problem. Q2. There is no menu displayed and only has live image display. a. Check whether the monitor is connected to the main video out and not the spot out.
DVR User Manual c. The HDD could have gone bad. Change a new one. Q6. Cannot record a. Make sure the HDD was formatted prior to use. b. Maybe the user hasn‟t enabled the record function or has done incorrect setup. Please refer to Chapter 5. c. Maybe HDD is full and thus the DVR is not able to record. Check HDD information from Disk management and if required, please enable the recycle function. d. Check the attributes of the HDD. It might be set to read only mode. e. The HDD could have gone bad.
DVR User Manual ② select Security------Custom Level….Refer to Fig 8-1 ③ Enable all the sub options under “ActiveX controls and plug-ins”. Refer to Fig 8-2 ④ Then click ok to finish setup. b. Other plug-ins or anti-virus may block ActiveX. Please disable or do the required settings. Fig 8-1 Fig 8-2 Q9: DVR displays “please wait…”all the time a.HDD power cable and data cable may not be well connected. Please check the connections for HDD. b.
DVR User Manual halt. Check with a good known HDD or try formatting the existing HDD. Q10: How to input password and numbers in the interface? Click the password or the input box a small keyboard will pop up. Please select characters to be input (the initial password is 123456), or you can use the digital keys on the front panel, or the digital keys on the remote controller. Q11: A hard disk is being identified as a new device however it was being used with another DVR of same model.
DVR User Manual PC Module CPU Motherboard HDD RAM VGA OS DirectX Parameters Intel Core(TM)2 Duo CPU E4600 G31/P31 chip 80G 1GB GMA3100/NVIDIA GeForce 8400/ ATI RADEON HD3450 Windows 2000(SP4 above) /Windows XP(SP2 above) VISTA 9.0 Q14: How to handle the situation that the codec Control is blocked when downloading in the VISTA or Win7 system? This problem can be fixed in two ways: a.
DVR User Manual Q15. How to play the backup file? a. Insert your USB device where the backup files are saved in the USB port of PC. If your files are saved in NVR format, you must have already download the backup player box before doing backup. Then double click to open your USB disk to find your backup files and backup player. Double click icon to install backup player. After you install it, open this player and click “Open Path” button to open your backup file.
DVR User Manual Appendix B Calculate Recording Capacity Users can calculate the required size of hard disk according to the total recording duration and DVR recording settings. The DVR uses fixed video bit rate. The below are the details at different settings for CBR. Video Format Resolution Frame Rate Totally(FPS) NTSC CIF 30 PAL CIF 25 Video Quality Highest Higher Medium Low Lower Lowest Highest Higher Medium Low Lower Lowest Bit Rate (kbps) 2M 1.5M 1M 768K 512K 256k 2M 1.
DVR User Manual Appendix C 1. Compatible Devices Compatible USB drive after test. Brand SSK Netac Kingston Aigo Smatter vider SanDisk Capacity 512MB, 1G, 2GB 4GB 2GB 2GB 1GB 4GB 2. Compatible SATA CD/DVD writers after test Brand TECLAST BENQ LITEON LITEON SAMSUNG Model GH22NP20/TL-22XD DW220S-0K4 DH—20A6S01C DH-20A4P02C TS-H653B 3.
DVR User Manual Brand Seagate Barracuda Seagate SV35.3 Seagate Pipeline HD.2 Maxtor Diamondmax HITACHI Deskstar WD WD1600JS Samsung HD161HJ Capacity 80G/160G/250G/320G /1.
DVR User Manual Appendix D 8-CH Specifications Compression format H.264 Main Profile Video output Composite:1.0V p-p/75Ω BNC×2, VGAX1 Video Input VGA Resolution Record Resolution Composite:1.
DVR User Manual Appendix E 16-CH Specifications Compression format H.264 Main Profile Video output Composite:1.0V p-p/75Ω BNC×2, VGAX1 Video Input VGA Resolution Record Resolution Composite:1.
450011000274 A0