DVR User Manual For H.
Digital Video Recorder User Manual CAUTION z Please read this user manual carefully to ensure that you can use the device correctly and safely We do not warrant all the content is correct. The contents of this manual are subject to change without notice z This device should be operated only from the type of power source indicated on the marking label. The voltage of the power must be verified before using.
Digital Video Recorder User Manual Table of Contents 1 Introduction ..................................................................................................................................................................................................................7 1.1 DVR Introduction......................................................................................................................................................................................................7 1.
Digital Video Recorder User Manual 4.1.1 System.........................................................................................................................................................................................................28 4.1.2 Time & date..................................................................................................................................................................................................29 4.1.3 DST......................................
Digital Video Recorder User Manual 4.6.1 Network........................................................................................................................................................................................................54 4.6.2 Sub stream ..................................................................................................................................................................................................55 4.6.3 Email....................................
Digital Video Recorder User Manual 7 Remote Surveillance .................................................................................................................................................................................................81 7.1 Accessing DVR ......................................................................................................................................................................................................81 7.1.1 On LAN ..........................
Digital Video Recorder User Manual 1 Introduction 1.1 DVR Introduction This model DVR (Digital Video Recorder) is designed specially for CCTV system. It adopts high performance video processing chips and embedded Linux system. Meanwhile, it utilizes many most advanced technologies, such as standard H.264 with low bit rate, Dual stream, SATA interface, VGA output mouse supported, IE browser supported with full remote control, mobile view(by phones), etc.
Digital Video Recorder User Manual BACKUP • Support USB 2.
Digital Video Recorder User Manual • • Support 128 PTZ presets and 8 auto cruise tracks Support remote PTZ control through internet SECURITY • Customize user right: log search, system setup, two way audio, file management, disk management, remote login, live view, manual record, playback, PTZ control and remote live view • Support 1 administrator and 15 users.
Digital Video Recorder User Manual 2 Hardware Installation Notice: Check the unit and the accessories after getting the DVR. Please disconnect the power before being connected to other devices. Don't hot plug in/out 2.1 Install Hard Drive &DVD Writer 2.1.1 Install Hard Drive Notice: 1. This series support four SATA hard drives or support three SATA hard drives plus one DVD writer. Please use the hard drive the manufacturers recommend specially for security and safe field. 2.
Digital Video Recorder User Manual 2.1.2 Install DVD Writer Notice: 1. The writers must be the compatible devices we recommend. Please refer to “Appendix C Compatible Devices” 2. This device is only for backup Step1: Unscrew and Open the top cover Step2: Connect the power and data cables. Place the DVD writer onto the bottom case as below. Fig 2.2 Connect the DVD Writer Step3: Screw the DVD writer. 2.
Digital Video Recorder User Manual Item Type Name Play REC AUDIO/+ P.T.Z./ - 2 Compound button MENU INFO BACKUP SEARCH Description When playing video, the light is blue When recording, the light is blue 1. Control voice 2. Increase the value in setup 1. Enter PTZ mode in live 2.
Digital Video Recorder User Manual 2.3 Rear Panel Instructions 2.3.1 Rear Panel Interface The rear Panel interface for 4-ch is shown as Fig 2.3: Fig 2.3 Rear Panel for 4-ch Item Name 1 2 3 4 Video out Video in E-SATA LOOP OUT 5 Spot out 6 7 8 Audio out MIC IN HDMI port Description Connect to monitor Video input channels from 1-4 Connect to HDD for backup For outputting 1-4ch image independently Connect to monitor as an AUX output channel by channel.
Digital Video Recorder User Manual Item Name 9 10 VGA port Audio in 11 USB port 12 13 14 15 16 17 18 19 LAN ALARM IN ALARM OUT P/Z K/B GND FAN POWER INPUT POWER SWITCH 20 Description VGA output, connect to monitor 4 CH Audio input To connect external USB devices like USB flash, USB HDD for backup or update firmware; or connect to USB mouse Network port Connect to external sensor1-4 4ch relay output. Connect to external alarm.
Digital Video Recorder User Manual Fig 2.4 Rear Panel for 8-ch Item Name 1 2 3 4 Video out Video in E-SATA LOOP OUT 5 Spot out 6 7 8 9 10 Audio out MIC IN HDMI port VGA port Audio in Description Connect to monitor Video input channels from 1-8 Connect to HDD for backup For outputting 1-8ch image independently Connect to monitor as an AUX output channel by channel.
Digital Video Recorder User Manual Item 11 12 13 14 15 16 17 18 19 Name USB port Description To connect external USB devices like USB flash, USB HDD for backup or update firmware; or connect to USB mouse Network port Connect to external sensor1-8 4ch relay output. Connect to external alarm. Connect to speed dome Connect to keyboard Grounding For cooling the device AC 110Vor 110V LAN ALARM IN ALARM OUT P/Z K/B GND FAN POWER INPUT POWER 20 Switch on/off SWITCH Tab 2.
Digital Video Recorder User Manual Item Name Description 1 2 3 4 Video out Video in E-SATA LOOP OUT 5 Spot out 6 7 8 9 10 Audio out MIC IN HDMI port VGA port Audio in 11 USB port 12 13 14 15 16 17 18 19 LAN ALARM IN ALARM OUT P/Z K/B GND FAN POWER INPUT POWER Switch on/off SWITCH Tab 2.
Digital Video Recorder User Manual 2.4 Remote Controller It uses two AAA size batteries and works after loading batteries as following: Step1: Open the battery cover of the Remote Controller Step2: Place batteries. Please take care the poles (+ and -) Step3: Replace the battery cover Notice: Frequently defect checking as following 1. Check batteries poles 2. Check the remaining charge in the batteries 3.
Digital Video Recorder User Manual Item Name 1 Power Button 2 INFOR Button 3 4 5 6 7 8 9 10 12 13 14 REC Button Digital Button Multi Screen Button SEARCH Button MENU Button ENTER Button Direction Button +/- Button Playback Control Button AUDIO Button Auto Dwell Button BACKUP Button 15 PTZ Control Button 11 Function Soft switch off to stop firmware running. Do it before power off.
Digital Video Recorder User Manual Step2: User can check the device ID by enter into System configurationÆBasic configurationÆdevice ID. User also can set other DVRs with the same device ID. For more convenient to operate, we don’t recommend user to set the device ID too long.
Digital Video Recorder User Manual Fig 2.7 Digital Numbers and Letters Input Window Users can change some value by the wheel, such as time. Move cursor onto the value, and roll the wheel when the value blinks. It supports mouse drag. I.e. Set motion detection area: click customized, hold left button and drag to set motion detection area. Set schedule: hold left button and drag to set schedule time In playback: Click left button to choose the options. Click right button to return to live mode.
Digital Video Recorder User Manual 3 Basic Function Instruction 3.1 Power On/Off Before you power on the unit, please make sure all the connection is good. 3.1.1 Power on Step1: connect with the source power; switch on the power button near the power port on the rear panel Step2: the device will be loaded, and the power indicator will display blue Step3: before start, a WIZZARD dialogue box will be pop-up (refer to below picture) and show some information about time zone and time setup.
Digital Video Recorder User Manual display without menu display, please check up whether other device has menu display firstly, or long press ESC key to wait for login dialog box to appear. Long press ESC key can switch the output between BNC and VGA. 3.1.2 Power off User can power off the device by using remote controller、keyboard and mouse. By remote controller: Step1: press Power button, the Shut down window will appear, click OK, the unit will power off after a while.
Digital Video Recorder User Manual Notice: the default user name and password is “admin” and 123456” The concrete operation steps for change password, add or delete user please refer to Fig 3.7 User management configuration for more details. 3.
Digital Video Recorder User Manual 3.3.1 Live playback Click Play screen. button to playback the record. Refer to Figure3-3.
Digital Video Recorder User Manual 4 Main menu setup guide Click right mouse or press ESC button on the front panel, the control bar will display on the bottom of the screen, refer to Fig 4-1: Click the Fig 4-1 main menu toolbar icon beside the screen display mode, a channel select dialog will appear as below: Take 8-channel DVR for example: user can tick off 8 channels form 1-ch to 16-ch at random to display the live pictures. Then click button to confirm the setting.
Digital Video Recorder User Manual Fig 4-2 Main Menu Click Setup icon will pop-up the configuration menu: 27
Digital Video Recorder User Manual 4.1 Basic configuration Basic configuration includes three sub menus: system、date& time and DST. 4.1.
Digital Video Recorder User Manual Step2: in this interface user can setup the device name, device ID, video format, max network users, VGA resolution and language. The definitions for every parameters display as below: Device name: the name of the device. It may display on the client end or CMS that help user to recognize the device remotely. Video format: two modes: PAL and NTSC. User can select the video format according to that of camera.
Digital Video Recorder User Manual Fig 4-4 basic configuration-time & date Step2: set the date format, time format, time zone in this interface; tick off “sync time with NTP server” to refresh NTP server date; user also can adjust system date manually Step3: click “default” button to resort default setting; click “apply” button to save the setting; click “exit” button to exit current interface. 4.1.
Digital Video Recorder User Manual Fig 4-5 basic configuration-DST Step2: in this interface, enable daylight saving time, time offset, mode, start & end month/week/date, etc. Step3: click “default” button to resort default setting; click “apply” button to save the setting; click “exit” button to exit current interface. 4.2 Live configuration Live configuration includes four submenus: live, main monitor, SPOT and mask. 4.2.
Digital Video Recorder User Manual Step1: enter into system configurationÆlive configurationÆlive; refer to Fig 4-6: Fig 4-6 live configurationÆlive Step2: tick off camera name; click “setting” button, a window will pop-up as Fig 4-7: 32
Digital Video Recorder User Manual Fig 4-7 live-color adjustment Step3: in this interface, user can adjust brightness, hue, saturation and contrast in live; click “default” button to resort default setting, click “OK” button to save the setting. Step4: user can setup all channels with same parameters, tick off “all”, then do relevant setup. Step5: click “default” button to resort default setting; click “apply” button to save the setting; click “exit” button to exit current interface. 4.2.
Digital Video Recorder User Manual interface. 4.2.3 SPOT Step1: enter into system configurationÆlive configurationÆSPOT; refer to Fig 4-9: Fig 4-9 live configuration-SPOT Step2: select split mode: 1×1and channel Step3: dwell time: the time interval for a certain dwell picture display switching to next dwell picture display Step4: selected the split mode, then setup current picture group.
Digital Video Recorder User Manual Fig 4-10 live configuration-mask Setup mask area: click Setting button, enter into live image to press left mouse and drag mouse to set mask area, refer to below picture. Click Apply button to save the setting. Delete mask area: select a certain mask area, click left mouse to delete that mask area, click Apply button to save the setting.
Digital Video Recorder User Manual Setup mask area Live image mask area 4.3 Record configuration Record configuration includes five sub menus: enable, record bit rate, time, recycle record and stamp. 4.3.
Digital Video Recorder User Manual Fig 4-11 record configuration-enable Step2: tick off record, audio and record time Step3: user can setup all channels with same parameters, tick off “all”, then to do relevant setup. Step4: click “default” button to resort default setting; click “apply” button to save the setting; click “exit” button to exit current interface.
Digital Video Recorder User Manual 4.3.2 Record stream Step1: enter into system configurationÆrecord configurationÆrecord bit rate; refer to Fig 4-12: Fig 4-12 record configuration-record bit rate Step2: setup rate, resolution, quality, encode and max bit stream Step3: user can setup all channels with same parameters, tick off “All”, then to do relevant setup. Step4: click “default” button to resort default setting; click “apply” button to save the setting; click “exit” button to exit current interface.
Digital Video Recorder User Manual Parameter Rate Resolution Quality Encode Max bit stream Meaning Range from: 1-30（NTSC）1-25(PAL) Support CIF and D1 The quality of recorded images. The higher the value is, the clearer the recorded image is. Six options: lowest, lower, low, medium, higher and highest. VBR and CBR Range from: 64 Kbps、128 Kbps、256 Kbps、512 Kbps、768 Kbps、1Mbps、2 Mbps 4.3.
Digital Video Recorder User Manual Pre-alarm record time: the record time before event happen i.e. record time before motion detection or sensor alarm is triggered. Post-alarm record: set the post recording time after the alarm is finished, five options: 10s、15s、20s、30s and 60s. Expire time: the hold time of saved records. If the set date is overdue, the record files will be deleted automatically. Step2: user can setup all channels with same parameters, tick off “all”, then to do relevant setup.
Digital Video Recorder User Manual random positions, refer to below Figures: Before drag after drag Step3: user can setup all channels with same parameters, tick off “all”, then to do relevant setup. Step4: click “default” button to resort default setting; click “apply” button to save the setting; click “exit” button to exit current interface. 4.3.
Digital Video Recorder User Manual 4.4.1 Schedule The volume means the seven days of a week from Monday to Sunday, the row means 24 hours of a day. Click the grid to do relevant setup. Blue means checked area, gray means unchecked area.
Digital Video Recorder User Manual Fig 4-16 schedule-week schedule Click “add” button to add a certain day schedule; click “delete” button to delete the selected schedule; Copy: user can copy the specify schedule to other dates. Click “OK” button to save the setting, click “Exit” button to exit current interface. ② User can apply the schedule setting of certain channel to other or all channels, just only select channel and click “Copy” button.
Digital Video Recorder User Manual blue. 4.4.3 Sensor Step1: enter into system configurationÆschedule configurationÆalarm; refer to Fig 4-18: Step2: the setup steps of alarm are familiar with schedule; user can refer to 4.4.1 Schedule for details. Note: the default schedule of sensor is full-selected, that is, the color of schedule setting interface is blue. Fig 4-18 schedule configuration-sensor 4.
Digital Video Recorder User Manual 4.5.1 Sensor Sensor includes three sub menus: basic, alarm handling and schedule. ① Basic Step1: enter into system configurationÆalarm configurationÆsensorÆbasic; refer to Fig 4-19: Fig 4-19 alarm configuration-sensor-basic Step2: enable sensor alarm, set the alarm type according to triggered alarm type. Two option: NO and NC. Step3: user can setup all channels with same parameters, tick off “all”, then to do relevant setup.
Digital Video Recorder User Manual Fig 4-20 alarm configuration-sensor-alarm handling Step2: select hold time, click Trigger button, and a dialog box will pop-up as Fig 4-21: Fig 4-21 alarm handling-trigger Step3: tick off Buzzer, there will be triggered buzzer alarm out; Full screen alarm: when triggered alarm, there will pop up full screen alarm; 46
Digital Video Recorder User Manual Email: tick of this function, when an alarm trigged, a notification email will be sent to user’s designed email box including trigger events, time, snap pictures, device name, ID camera name etc. To alarm out: tick off the channel, there will be triggered alarm out in the designated channel. Click OK button to save the setting; click Exit button to exit the current interface. To record: tick off recoding channels, it will record the camera when alarm triggered.
Digital Video Recorder User Manual Step2: the setup steps of sensor schedule are familiar with schedule; user can refer to 4.4.1 Schedule for details. Note: the default schedule of sensor is full-selected, that is, the color of schedule setting interface is blue. 4.5.2 Motion Motion includes two sub menus: motion and schedule.
Digital Video Recorder User Manual Step3: the setup steps of motion trigger are familiar with alarm handling; user can refer to Chapter 4.5.1 Sensor Æalarm handling for more details. Step4: click Area button, a dialog box will pop-up as Fig 4-24: Fig 4-24 motion-area Step5: in the Area interface, user can drag slide bar to set the sensitivity value (1-8), the default value is 4. The higher the value is the higher sensitivity you get.
Digital Video Recorder User Manual Note: when user drag mouse to set motion detection area, they have to click icon to clear all set detection area firstly, and then make the operation. Step6: user can setup all channels with same parameters, tick off “all”, then to do relevant setup. Step7: click “default” button to resort default setting; click “apply” button to save the setting; click “exit” button to exit current interface.
Digital Video Recorder User Manual 4.5.3 Video loss Step1: enter into system configurationÆalarm configurationÆvideo loss; refer to Fig 4-26: Fig 4-26 alarm configuration-video loss Step2: the setup steps of video loss trigger are familiar with alarm handling; user can refer to Chapter 4.5.1 Sensor Æalarm handling for more details. Step3: user can setup all channels with same parameters, tick off “all”, then to do relevant setup.
Digital Video Recorder User Manual 4.5.4 Other alarm Step1: enter into system configurationÆother alarm; refer to Fig 4-27: Fig4-27 other alarm Step 2: Disk Full: If the disk is full, the device will auto send an email to users designated mailbox to notify the conflict details. IP conflict: if there is an IP address conflict within the same network, the device will auto send an email to users designated mailbox to notify the conflict details.
Digital Video Recorder User Manual 4.5.5 Alarm out Alarm out includes three sub menus: alarm out, schedule and buzzer ① Alarm out Step1: enter into system configurationÆalarm out; refer to Fig 4-28: Fig 4-28 system configuration-alarm out Step2: in this interface, set relay alarm out name, select hold time which means the interval time between the two adjacent alarms. Step3: user can setup all channels with same parameters, tick off “all”, then to do relevant setup.
Digital Video Recorder User Manual 4.6 Network configuration Network configuration includes two submenus: network and network stream. 4.6.1 Network Step1: enter into system configurationÆnetwork configurationÆnetwork; refer to Fig4-29: Fig 4-29 network configuration-network Step2: HTTP port: the default value is 80.
Digital Video Recorder User Manual in IE address blank .i.e. set HTTP port to 82, IP address: http://192.168.0.25, user needs to input that address: http://192.168.0.25:82 into IE browser.
Digital Video Recorder User Manual Fig 4-30 network configuration-sub stream Step2: select fps, resolution, quality, encode and max bit rate Step3: user can setup all channels with same parameters, tick off “all”, then to do relevant setup. Step4: click “default” button to resort default setting; click “apply” button to save the setting; click “exit” button to exit current interface. Note: After selecting Resolution and Fps, the rest fps will be shown.
Digital Video Recorder User Manual Quality Encode Max bit rate The quality of the clients’ image. The higher the value is, the clearer the record image. Six options: lowest, lower, low, medium, higher and highest. VBR and CBR Range from: 64 Kbps、128 Kbps、256 Kbps、512 Kbps、768 Kbps、1Mbps、2 Mbps 4.6.3 Email Step1: enter into system configurationÆnetwork configurationÆemail; refer to Fig 4-31: Fig 4-31 network configuration-email SMTP Server/Port: the name and port number of SMTP server.
Digital Video Recorder User Manual Tick off “This server requires a secure connection (SSL)”; user can setup mail servers (such as Gmail) according to actual needs, Send address/password: sender’s email address/password Receive address: receiver’s email address. Here user can add at least three mail addresses. Click TEST button to test the valid of the mailbox. Attaching image amount: user can attach at most three images at one time. Snap Time Interval(s): User can select snap time interval. 4.6.
Digital Video Recorder User Manual current interface. Note: The domain name server that selected by user is a banding domain name of DVR. User should logon the website which provided by the server supplier to register a user name and password firstly, and then apply a domain name on line for the server. After the successful apply, user can access the server from the IE client by inputting that domain name. 1． Domain name Registration （Take www.dyndns.
Digital Video Recorder User Manual Then create user account. For example, the username is “bcd”, password is “123456”. Click” Create Account” button to create user account. 2． DVR Setting （1） Domain name According to the domain name registration of “DDNS”，the domain name for DVR is “www. abc.dyndns.tv” （2） Username and password According to the above registration, username is “bcd”. According to the above registration, password is “123456” 3． Application Connect DVR to the Network Client.
Digital Video Recorder User Manual HTTP port to 82, IP address: http://192.168.0.25, user needs to input that address: http://192.168.0.25:82 into IE browser. Definitions and descriptions of network configuration: DDNS server DDNS server Website provided by dynamic domain name supplier. The optional: www.dns2p.net ， www.meibu.com ， www.dyndns.comandwww.no-ip.
Digital Video Recorder User Manual Fig 4-34 add-general ① General: Input user name, password; select user type: normal and advance, input the MAC address of the PC; click OK button, this user will be added into the user list box; click Exit button to exit the current interface. Note: when the default value of binding PC MAC address is 0, the user is not bind with the specify computer; the, the user can log in DVR on the binding computer after set the specific binding MAC address.
Digital Video Recorder User Manual Fig 4-35 add user-authority Step2: In the authority interface, assign the definite operation right for that user. Step3: in the user management interface, click Setup button to modify user name, user type and binding PC MAC address. Step4: select the user that user wants to delete in the user list box, then click Delete button to delete this user. Step5: click Change password button to modify the password; click Exit button to exit the current interface. 4.8 P.T.
Digital Video Recorder User Manual Fig 4-36 P.T.Z configuration-serial port Step2: tick off Enable, setup the value of address, baud rate and protocol according to the settings of the speed dome. Step3: user can setup all channels with same parameters, tick off “all”, then to do relevant setup. Step4: click “default” button to resort default setting; click “apply” button to save the setting; click “exit” button to exit current interface.
Digital Video Recorder User Manual Protocol 4800、9600、19200、34800、57600、115200、230400、460800、21600. Communication protocol of the PTZ device. Range from: NULL 、 PELCOP、PELCOD 、LILIN、MINKING、NEON、STAR、VIDO、DSCP、 VISCA、SAMSUNG、RM110、HY ② Advance Step1: enter into system configurationÆ P.T.Z configurationÆadvance; refer to Fig 4-37: Fig 4-37 P.T.
Digital Video Recorder User Manual Fig 4-38 advance-preset setting a. in the preset set interface, click Setting button, a dialog will pop-up as Fig 4-39: Fig4-39 preset set-setting b. user can control the dome rotates up, up left, down, right down, left , left down, right and up right and stop rotating; adjust the rotate speed and the value of zoom, focus and iris of the dome; c. select the serial number of the preset point, set the preset name.
Digital Video Recorder User Manual Step3: in the Advance interface, click cruise “Setting” button, a dialog box will pop-up as Fig 4-40: Fig 4-40 cruise set a.
Digital Video Recorder User Manual b. click Add icon to set the speed and time of preset point; select a preset point, click Delete icon to delete that preset point; click Modify icon to modify the setting of a preset point. User can click those icons to adjust the position of preset point. Click Preview button to preview the cruise line, click OK button to save the setting, click Exit button to exit current interface. c.
Digital Video Recorder User Manual 4.9.1 Reset Reset all settings the device will reboot. 4.9.2 Import/Export Fig 4-43 Import/Export User can export the data files into mobile storage devices as backup function, and then import specified data files from mobile storage device to DVR.
Digital Video Recorder User Manual 5 Record search & playback and backup Search configuration includes three submenus: time search, event search and file management. 5.
Digital Video Recorder User Manual Playback buttons Note: when the monitor resolution is VGA800*600, the time search interface will appear a hide button, click this button, the whole interface can be expanded. 5.
Digital Video Recorder User Manual tick off Motion, Sensor or All accordingly. Step3: double check a certain record file to playback. Note: when the monitor resolution is VGA800*600, the event search interface will appear a hide button, click this button, the whole interface can be expanded. 5.
Digital Video Recorder User Manual ③ Delete: checked an unlocked file, click Delete button to delete this file. Step3: tick off “All” button; user can lock/unlock or delete all files in the file management column. Step4: double click an unlocked item to playback. Note: when the monitor resolution is VGA800*600, the file management interface will appear a hide button, click this button, the whole interface can be expanded. 5.
Digital Video Recorder User Manual list box Step3: checked a data file or tick off “All” to select all data files , click Backup button, a dialog box will pop-up as Fig 5-5: Fig 5-5 backup information Step4: in the backup information interface, user can check the relevant information of backup files, storage type, save file type, etc. click Start button to starting backup.
Digital Video Recorder User Manual 6 Manage DVR 6.1 Check system information Check system information includes five submenus: system, event, log, network and online user. 6.1.1 System information In this interface, user can check the hardware version, MCU version, kernel version, device ID, etc.
Digital Video Recorder User Manual 6.1.2 Event information In this interface, user can check record events according to set date; refer to Fig 6-2: Fig 6-2 event information Note: if there are overlapping files, a “+” character will show behind the channel ID. 6.1.
Digital Video Recorder User Manual Fig 6-3 log information User can export the data files into mobile storage devices as backup function. 6.1.
Digital Video Recorder User Manual Fig 6-4 network information 6.1.5 Online information In this interface, user can check the details of the current connection of online users; refer to Fig 6-5: Refresh: refresh the current interface. Disconnect: the administrator authorized to disconnect the client terminal, that PC will not be able to access the device within five minutes.
Digital Video Recorder User Manual Fig 6-5 online information 6.1.6 Manual alarm In this interface, user can check the relevant parameters of manual alarm; refer to Fig 6-6: Fig 6-6 manual alarm 6.1.
Digital Video Recorder User Manual Fig 6-7 disk management Note: please format the hard disk before record. If not being formatted, it will show the status of the disk-free space, and total space show OM at the bottom of screen. Step2: click Refresh button to refresh the disk information of the list box; set the property of the disk then click Apply button to save the setting Step3: checked a hard disk, click Format button to star format.
Digital Video Recorder User Manual 7 Remote Surveillance 7.1 Accessing DVR If making remote view, the DVR must connect with LAN or internet. Then enable network server in the unit. Please refer to 4.6 Network Configuration. This unit supports IE browser, not any client software installed. In addition, it supports XP and Vista. 7.1.1 On LAN Step1: Input IP address, Subnet, Gateway. If using DHCP, please enable DHCP in both the DVR and router.
Digital Video Recorder User Manual Fig 7.1 View with IE browser Notice: If HTTP port is not 80, other number instead, need add the port number after IP address. For example, set HTTP port as 82, need input IP address like 192.168.0.25:82. User name and password here are the same with that used on the DVR. The default is admin and 123456.
Digital Video Recorder User Manual 7.1.2 On WAN There are two ways that the DVR is connected to internet. 1. Connect the DVR to internet through a router or virtual server. Step1: Input IP address, Subnet, Gateway. If using DHCP, please enable DHCP in both the DVR and router. Step2: Enter Video to set network video parameters like resolution, frame rate etc. Step3: Forward IP address and port number in Virtual Server setup of the router or virtual server. Close firewall.
Digital Video Recorder User Manual 7.
Digital Video Recorder User Manual ① ④ ⑦ ⑩ Channel indicator Snapping picture Bidirectional talk PTZ control ② Screen display mode ③ Volume ⑤ ⑧ ⑪ Start manual record Playback Master/sub stream status ⑥ ⑨ Start IE record Color Note: click button to record manual and the record file will be saved in user’s PC.
Digital Video Recorder User Manual Drag the slide bar to adjust Brightness, Contrast, Hue, and Saturation. Click Default to reset them to original value. Description Buttons Drag the scroll bar to adjust the brightness of channel Drag the scroll bar to adjust the contrast of channel Drag the scroll bar to adjust the saturation of channel Drag the scroll bar to adjust the hue of channel Click this button to recover the default value of brightness, contrast, saturation and hue.
Digital Video Recorder User Manual dome. Click button near 'Iris' button to decrease light of the dome. 'Zoom' button. Click button near 'Zoom' button to zoom in the locale button near 'Zoom' button to zoom out picture of this camera. Click the locale picture of this camera. 'Focus' button. Click button near 'Focus' button to have long focus. button near 'Focus' button to have short focus.
Digital Video Recorder User Manual max 6FPS （PAL）/7FPS（NTSC） for every channel, it requires low network bandwidth. Therefore, users can select the stream according to their bandwidth. All to master/sub stream: set all channel to master stream or sub stream.
Digital Video Recorder User Manual Fig 7-5 Play record file interface This DVR supports remote time search, event search and file management.
Digital Video Recorder User Manual Fig 7-6 time search interface Step2: click “Search” button.
Digital Video Recorder User Manual research, etc.
Digital Video Recorder User Manual Fig 7-8 event search interface Step2: click the highlight date and select record channels and then tick off the event type: motion and sensor, click “search” button Step3: the events will be display in the event list box, double-click certain item to playback File Management Step1: Enter into SearchÆfile management; refer to Fig 7-9: 92
Digital Video Recorder User Manual Fig 7-9 file management interface Lock: select certain file item in the file list box, click “Lock” button to lock this file that ca not be deleted or overlaid Unlock: select a locked file, click “unlock” button to unlock this file Delete: select an unlock file, click “delete” button to delete this file from file list 93
Digital Video Recorder User Manual 7.3.2 Remote backup Click Backup button to enter into backup interface, refers to Fig 7-10: Fig 7-10 remote backup interface Step1: select channels, set the start and end time, then click “search’ button, the file information will be displayed in the file list box Step2: select backup files, click “browse” button to set the save path, and then click “backup” button to start backup. The backup files will be saved on user’s PC.
Digital Video Recorder User Manual 7.4 Remote System configuration User can remote setup the parameters of the device. Functions of remote configurations include: basic configuration, live configuration, record configuration, schedule configuration, alarm configuration, network configuration, PTZ configuration and user configuration. User should firstly select an item in the menu list on the left, and then setup the relative parameters.
Digital Video Recorder User Manual 7.5 Remote Management Remote Information Search The system will automatically record the working condition and operation process during the period of work. User can view information, such as username, IP address and so on. Enter into INFO→Log, user can set the start time to view the log record as follows: .
Digital Video Recorder User Manual 8 Mobile Surveillance This DVR supports mobile surveillance by Iphone, Gphone or smart phones with Windows mobile and symbian OS. At the same time, it supports 3G network. We tested Dopod D600 (WM5) and Dopod S1 (WM6), which work fine with the DVR. It wants to make mobile surveillance, need first enable network service on the DVR, and refer to Chapter 4.6 Network configuration. The below is the use instructions on mobile client end for two OS. 8.
Digital Video Recorder User Manual Step3：Click “Yes” to start downloading and installing: Step4：PCam will be opened automatically after installed 98
Digital Video Recorder User Manual Step5：Input the server’s address, ID and password respectively in the columns of “Server”, “User” and “Password”, and click “Go” to log on the server. It will show the picture if access successfully. Step6：Camera 1 is the default channel after login.
Digital Video Recorder User Manual Notice: User name and password here are the same with that used on the DVR. The default is admin and 123456. 8.2 By Phones with Symbian Please use the smart phones with symbian version supported by this unit. Step1：Firstly enable the network access on mobile phone. Then run Web browser. Step2：Input the DVR server’s IP address in a new-built bookmark. Click this bookmark to connect to the DVR. Step3：A welcome window will pop up and requires a package.
Digital Video Recorder User Manual Step6：Run Scam program. It will enter a function interface. Live view: to do mobile live view Image view: to check the pictures snapped in live view System setting: Login setting and Alarm setting. Help: function indication and help Step7：Click System setting--->Login Setting to enter login interface.
Digital Video Recorder User Manual Step8：Input the server’s address, ID and password respectively. Then save. Notice: About Access point, there may be different access points in different countries or from service providers. Step9：Enter Live View, it will connect the server and display pictures. Notice: User name and password here are the same with that used on the DVR. The default is admin and 123456. Step10：In Live View, users can do snapshot, change channels and control PTZ.
Digital Video Recorder User Manual 8.3 The operation method for iPhone mobile clients At present, the software only supports version of iPhone os2.2 and above, if phone firmware lower than this version please upgrade it.
Digital Video Recorder User Manual Step 3: Click SuperCam, enter into “introduce” interface and click FREE”, it will change into “INSTALL” Step 4: Enter into iTunes Store password, click “OK”will display below interface Note: if it was the first time for user to operate please enter into user ID; if there is no Store account, user need to apply one.
Digital Video Recorder User Manual Step 5: Just be patient to download and install. After installed, SuperCam icon will display. Click this icon, a function interface will appear Step 6: Click “System setting”, enter into login interface. Enter into server’s IP address (or domain name), user’s ID and password. Click Back to save.
Digital Video Recorder User Manual Step 7: Click Live View, the default Cam1 picture will be displayed. Click to capture picture. Step 8: On function interface, click Image View to view the captured picture. Click picture. Click or to switch to next or previous to delete the current picture.
Digital Video Recorder User Manual Iphone help Pic1 Pic2 Pic3 Live View After successfully installed SuperCam software, Click on System Setting (Pic 1), and then input Server IP address or Domain, User name and password to log in (Pic 2). If connected successfully, it will go to Live View of CH1 as default (Pic 3), please choose other desired channels from channel button underneath. Meanwhile, please note below functions: 1. : Switch channels only) (pic4) PTZ Control buttons: Item Buttons 1 3 2.
Digital Video Recorder User Manual Focus return to live 5 Image View Item 1 4 Buttons Explanations Previous picture The last picture Pic 4 Item Buttons 2 5 Pic 5 Explanations Item Next Picture 3 Delete 6 Buttons Explanations The first Picture Search Pictures, search page as Pic 5 108
Digital Video Recorder User Manual 8.
Digital Video Recorder User Manual Step 5: user can view the download and install process in notifications; finished download, the software will install automatically. Login Enter into server’s IP address (or domain name), user’s ID and password. Click “Remember server” to save the setting; click button can quick input saved server address, user name and password.
Digital Video Recorder User Manual Main menu 【Playback】 【Log】 【Live】 playback record file log record live view 【Image】 image view 【Information】 device information view 【Server List】 【Settings】 device list software setting 【Help】 【Logoff】 software help center logoff and return to login interface Live view （Fig 1） （Fig 2） 111
Digital Video Recorder User Manual Mark 1 Current viewing channel Channel status PTZ, click to switch to Fig 2 interface Snap record talk Live audio Full screen Return Upward rotates the PTZ Downward rotates the PTZ Leftward rotates the PTZ Rightward rotates the PTZ Stop rotates the PTZ Zoom In/Focus In/Iris Add Zoom Out/Focus Out/Iris Sub Group Mark 2 Switch channels Preset Select the preset point Set the cruise line Image view 112
Digital Video Recorder User Manual Record playback （Fig 3） Click the record file (Fig 3) to playback (Fig 4) （Fig 4） Play/pause stop Full screen Return to record file interface (Fig 3) Server list Config interface 113
Digital Video Recorder User Manual Alarm setting Storage setting Path Reserved disk space Video clip size Remove all recorder files before Tick off Sound Alarm，when Video Loss/Sensor/Motion happen，trigger sound alarm; Tick off Vibrate Alarm, when Video Loss/Sensor/Motion happen，trigger vibrate alarm User can setup the relevant parameters of mobile video. This function can be valid only insert SD card. Save path for mobile video files, the default catalog is /SDCard/. Click button to change path.
Digital Video Recorder User Manual Information view Device ID: the current connection device ID Software version: The current connection device software version Build date: the current connection device build date Software version: The current use of mobile phone software version Software build date: the current use of mobile phone software version 115
Digital Video Recorder User Manual Appendix A FAQ Q1. Why the DVR cannot start after connected to the power? a. The adapter has been damaged. Please change an adapter b. The power of the adapter is not enough. Please remove the HDD to check c. Hardware problem Q2. There is not menu output or only has live image display a. Check up whether other devices can display menu or long press ESC key to wait for login dialog box to appear. Q2. The indicator of the DVR lights, but no output. Why? a.
Digital Video Recorder User Manual Q5. Cannot record a. Don't format HDD. Please format it manually first. b. Don't enable record function or incorrect setup. Please refer to Chapter 5 Record search & playback and backup. c. HDD is full and not enables recycle function. Please refer to 4.3 Record configuration. Chang a new HDD or enable recycle. d. The HDD is damaged. Change a new one. Q6. Cannot use mouse. a. wait 1-2 minutes after mouse connected. b. Not detected. Plug/unplug several times. c.
Digital Video Recorder User Manual ② select Security------Custom Level….Refer to Fig 7-1 ③ Enable all the sub options under “ActiveX controls and plug-ins” refer to Fig 7-2 ④ Then click ok to finish setup. b. Other plug-ins or anti-virus block activeX. Please uninstall or close them. Fig7-1 Fig7-2 Q8: How to deal with when DVR starts, it displays “please wait…”all the time First possible reason: hard-disk cable and data cable are not well connected.
Digital Video Recorder User Manual working, please unplug them and then try re-plugging again; Second possible reason: It is forced to stop because hard disk has disabled track which causes the system checking hard disk cannot skip Solution: Change another new hard disk or reformat the broken one Q9: How to input password and digital numbers The method to input password and digital numbers is to click the box behind password or items needing to input by numbers, and then the small keyboard will appear.
Digital Video Recorder User Manual PC Module CPU Motherboard HDD RAM VGA OS DirectX Parameters Intel Celeron 2.4G Intel 845 80G 512M NVIDIA GeForce MX440/FX5200 ATIRADEON 7500/X300 Windows 2000(SP4 above) /Windows XP(SP2 above) /VISTA 9.
Digital Video Recorder User Manual Account on or off. Cancel Use User Account Control (UAC) to help protect your computer. b. Right click IE browser (refer to Fig 14-2), select Run as administrator to run browser.
Digital Video Recorder User Manual Appendix B Calculate Recording Capacity Users can calculate the size of hard disk according to the saving time and DVR recording settings. The DVR uses fixed video bit rate. The below are the details at different settings. Frame Rate Video Video Quality Bit Rate (kbps) Used Space(MB/h) Resolution Totally(FPS) Format Highest 1024 450 Higher 768 337.5 NTSC CIF 30 Medium 512 225 Lower 384 168.75 Lowest 256 112.5 Highest 1024 450 Higher 768 337.
Digital Video Recorder User Manual Appendix C 1. Compatible USB drive after test. Brand SSK Netac Kingston Aigo Smatter vider SanDisk Compatible Devices Capacity 512MB, 1G, 2GB 4GB 2GB 2GB 1GB 4GB Tab C.1 Compatible USB drive 2. Compatible SATA CD/DVD writers after test Brand Model TECLAST GH22NP20/TL-22XD BENQ DW220S-0K4 LITEON DH—20A6S01C LITEON DH-20A4P02C SAMSUNG TS-H653B Tab C.
Digital Video Recorder User Manual Appendix D 4-CH Specifications Compression format Video output Video input VGA Resolution Record Resolution Display Frame Rate Record Frame Rate Audio input Audio output Alarm input Alarm output: Record Mode Simplex/Duplex/Triplex Network Interface PTZ control Communication interface Disk info Remote controller Power supply Temperature Humidity Average Operating Power （Excluding HDD） Standard H.264 Baseline Composite：1.0V p-p/75Ω BNC×2 , VGAX1 Composite：1.
Digital Video Recorder User Manual Appendix E Compression format Video output Video input VGA Resolution Record Resolution 8-CH Specifications Standard H.264 Baseline Composite：1.0V p-p/75Ω BNC×2 , VGAX1 Composite：1.
Digital Video Recorder User Manual Appendix F Compression format Video output Video Input VGA Resolution Record Resolution 16-CH Specifications Standard H.264 Baseline Composite：1.0V p-p/75Ω BNC×2, VGAX1 Composite：1.
Quick Start Guide 4/8/16-Ch DVR 1
4/8/16DVR Quick Start Guide 1. Install Hard Drive &DVD Writer 1.1 Install Hard Drive Notice: 1. this series support four SATA hard drives or support three SATA hard drives plus one DVD writer. Please use the hard drive the manufacturers recommend specially for security and safe field. 2. Please calculate HDD capacity according to the recording setting. Please refer to “Appendix B Calculate Recording Capacity”. Step1: Unscrew and Open the top cover Step2: Connect the power and data cables.
4/8/16DVR Quick Start Guide Fig 2.1 Rear view for 4-ch DVR 1 Connect to monitor 2 Video input channels from 1-4 3 Connect to HDD for backup 4 Connect to monitor as an AUX output channel by channel.
4/8/16DVR Quick Start Guide display device 9 8 CH Audio input 10 To connect external USB devices like USB flash, USB HDD for backup or update firmware; or connect to USB mouse 11 Network port 12 Connect to external sensor1-8 13 14 Connect to speed dome 15 4ch relay output. Connect to external alarm. Connect to keyboard 16 Grounding 17 For cooling the device 18 POWER INPUT 19 POWER SWITCH 2.3 Rear view for 16-ch DVR 2.
4/8/16DVR Quick Start Guide Step3: before start, a WIZZARD window will be pop-up and show some information about time zone，time setup，network configuration, record configuration and disk management. User can setup here and refer to the concrete setup steps from the corresponding chapters. If users don’t want to setup Wizard, please click Exit button to exit. After the device power on, if there is no menu or only has live image display, user can long press ESC button to switch.
4/8/16DVR Quick Start Guide and authorization check. Live configuration：User can set name/time display, picture color and hide cameras. Record configuration：User can set record quality, frame rate, resolution, time stamp and recycle. Schedule configuration: users can set schedule for timer, motion detection, and sensor alarm respectively. Alarm configuration: users can set sensor type, alarm trigger and buzzer alarm.
4/8/16DVR Quick Start Guide Users can set different schedule time for every day in one week. If user wants a special schedule for one day can use Holiday function. The column means the seven days of a week from Monday to Sunday, the row means 24 hours of a day. Click the grid to do relevant setup. Blue means checked area, gray means unchecked area. 4.2.
4/8/16DVR Quick Start Guide Fig 4-6 sensor alarm record Enter into Trigger configuration, select alarm out and recording cameras and linked PTZ; set Alarm out hold time and Buzzer hold time. Click OK to save settings. 4.3 Playback This unit supports live record playback, time search and event search. It displays full or 4 screens in playback. 4.3.1 Live playback button to playback the record. Refer to Figure4-7. User can do Click Play concrete operation by click the buttons on screen.
4/8/16DVR Quick Start Guide 4.3.2 Time search Enter into Search configuration, select Time search. If it recorded in a certain day, the date will show highlight. Select a date, press Search button, click the time grid to set the play start time or input play record time manually. The selected time match the blue grid. Click Play button. It will play from the time point where user set. Click the relative buttons on the screen to do fast forward/rewind, pause, stop, and change the screen mode and re-search.
4/8/16DVR Quick Start Guide 4.4 Back up This unit supports backup by built-in SATA DVD Writer, with USB Flash and USB HDD. Install DVD Writer (refer to Chapter1.2), enter into Backup interface (refer to Fig 3-10), set the start & end time, select channels, click Search button; the searched data will be displayed in the data backup list box. Press Backup button, it will begin to write video from HDD inside DVR to backup device. Click Start button to start backup. Fig 4-10 Backup setup 5.
4/8/16DVR Quick Start Guide Enter Video to set network video parameters like resolution, frame rate etc. Open an IE browser on computer on the same LAN. Input the IP address of the DVR in IE address blank and enter. IE will download ActiveX automatically. Then a window pops up and asks for user name and password. Input name and password correctly (the default user name is admin and the password is 123456), and enter. It will show the remote picture.
