User Manual

Digital Video Recorder User Manual

Item Name Function

1 Power Button

Soft switch off to stop firmware running. Do it before

power off.

2 INFOR Button

Get information about the DVR like firmware version,

HDD information

3 REC Button To record manually

4 Digital Button Input digital or choose camera

5 Multi Screen Button To choose multi screen display mode

6 SEARCH Button To enter search mode

7 MENU Button To enter menu

8 ENTER Button To confirm the choice or setup

9 Direction Button Move cursor in setup or pan/title PTZ

10 +/- Button To increase or decrease the value in setup

Playback Control

Button

To control playback, Fast forward/rewind/stop/single

frame play

12 AUDIO Button To enable audio output in live mode

13 Auto Dwell Button To enter auto dwell mode

14 BACKUP Button To enter backup mode

15 PTZ Control Button

To control PTZ camera:

Move camera/ZOOM/FOCUS/IRIS/SPEED control

Operation processes with remote controller to control multi-DVR

The device ID of the DVR is 0. When use of remote controller to control single DVR, it’s not necessarily to reset the device

ID, user can do operation directly; when control multiple DVR with remote controller, please refer to below steps:

Step1: Activate remote controller to control DVR: enable DVR: turn the IR sensor of the remote controller to the IR receiver

that on the front panel, press the number key 8 twice, then input device ID (Range from: 0-65535; the default device ID is 0.)

with other digital number: 0-9, after that, press ENTER button to confirm.