User Manual

Digital Video Recorder User Manual

4.5.4 Other alarm

Step1: enter into system configurationÆother alarm; refer to Fig 4-27:

Fig4-27 other alarm

Step 2: Disk Full: If the disk is full, the device will auto send an email to users designated mailbox to notify the conflict

details.

IP conflict: if there is an IP address conflict within the same network, the device will auto send an email to users

designated mailbox to notify the conflict details.

Disconnect: if the disconnect happen, the device will auto send disconnection information to users designated

mailbox.

Step3: the setup steps of Buzzer, Email, To Alarm Out are familiar with alarm handling; user can refer to Chapter 4.5.1

Sensor Æalarm handling for more details.

Step 4: select a hard disk in the pull down list box, when the disk capacity is lower than that value, there will appear some

text information on the lower right of the live image.

Step 5: click “default” button to resort default setting; click “apply” button to save the setting; click “exit” button to exit

current interface.