User Manual

Digital Video Recorder User Manual

4.5.5 Alarm out

Alarm out includes three sub menus: alarm out, schedule and buzzer

① Alarm out

Step1: enter into system configurationÆalarm out; refer to Fig 4-28:

Fig 4-28 system configuration-alarm out

Step2: in this interface, set relay alarm out name, select hold time which means the interval time between the two adjacent

alarms.

Step3: user can setup all channels with same parameters, tick off “all”, then to do relevant setup.

Step4: click “default” button to resort default setting; click “apply” button to save the setting; click “exit” button to exit current

interface.

② Schedule

Step1: enter into system configurationÆschedule;

Step2: the setup steps of alarm out schedule are familiar with schedule; user can refer to 4.4.1 Schedule for details.

Note: the default schedule of motion detection is full-selected, that is, the color of schedule setting interface is

blue.

③ Buzzer

Step1: enter into system configurationÆbuzzer;

Step2: tick off Buzzer, set buzzer alarm hold time