Owner's manual

NVMS-1000 User Manual

 Motion Detection Alarm Settings

Click “Area and Sensitivity” under Motion Detection

Alarm Setting to enter the interface.

① Drag slide bar to set the sensitivity value. The

higher the value is, the more sensitive it is.

② Click ―Erase‖/ ―Add‖, then hold press ―Ctrl‖ and

left click mouse to delete /add the area you want.

③ Click 【All】/【Reverse】/【Clear All】 button to

select area or clear all the area quickly.

Click “Set Motion Alarm” under Motion Detection

Alarm Setting to enter the interface .

Note: Please refer to the user manual of the device for

device linkage configuration.

Click “System Trigger” under Motion Detection Alarm

Setting to enter the interface.

Under the system linkage, check ―Trigger to Play Audio

File‖. If the motion alarm of a certain channel is

triggered, there will be given out a sound like ―beep‖.

Click 【Trigger the Big Screen】 button to select channel.

If the motion alarm of the selected channel is triggered, a big picture will pop up on the screen.

Click 【Trigger the Record Channel】 button to select channel. If the motion alarm of the selected channel is

triggered, the channel’s record will be opened automatically.