.co m H.264 Wifi IP Cam Tissue Box Covert DVR Camera Wifi IP Camera is Accessible from Anywere in the World by Internet TBX-DVRWF era CCT V * COLOR 1/3” CCD 480 TVL High Resolution * Sending Live Video and Audio wirelessly by Wi-Fi / 3G Phone / Ethernet * H.264 Algorithm hardware compression * Easy Recording setup by Internet * Super Low Lux Night Vision 0.001Lux * Wide Angle 2.
Table of Contents Spy C am era CCT V.c om 1 Brief Introduction...........................................................................................................................1 2 Installation Guide...........................................................................................................................1 3 Software Instructions .....................................................................................................................4 3.1 Main Interface ............
om 1 Brief Introduction The software used to realize the central control for all internet video monitor devices (including:DVS and IP camera) : monitor, data storage, data transfer\manage\control. This version support 1/4/6/8/9//12/16//20/25/30 display, OSD setting, talkback, record playback, alarm control and MD, etc. The interface is friendly and easy, can help to control more than one device in same CCT V.c time.
era CCT V.c om Select English, and click【OK】： Spy C am Click 【Next】, the window below will pop up: Press 【Browse…】 to change the default path. If you do not want to change, press 【Install】.
CCT V.c om The below window will pop up: Spy C am era Then the setup is completed successfully.
om 3 Software Instructions 3.1 Main Interface Run DVS Client software, need input password, default is blank. Please refer 【Client era CCT V.c Setup】 → 【local user management】for user name and password change.
can’t link. Please change device and pc in same segment. Mark2: Default IP is 192.168.0.233, gateway is 192.168.0.1. om Mark1: If device not in same network segment, the software can search the IP address but CCT V.c ② Can add device IP address/ Domain name by manual, click【add】 pop following dialog: ③ Input device IP/domain name, eg input IP/Host testdvs.3322.
CCT V.
om 3.2 The main interface function 3.2.1 Toolbar CCT V.c Followed by login info, talk, sound, snap, record, color, setup, rotation, play. ：Click to check device user number / : Click for Talk off/on / : Click for Sound off/on ：Click for current channel snap / : Click to start or off record. Click Click ：Click for brightness/contrast/Saturation/color setting.
om CCT V.c 3.2.1.2 OSD Spy C am era OSD is “on screen display”, mean the info accompany with the image. Allow setting channel info, time, text color and position.
3.2.1.3 Sheltered Area choose the area, click 【clear】 to era The mask effect as below: CCT V.c delete it. om Sheltered Area as needed. Hold 【ctrl】 to drag mouse 3.2.1.4 Motion Detection 【Area setting】Hold 【ctrl】 choose the area, max 4 zones allowed. 【Sensitivity】Setting high for high sensitivity. am 【Valid Period of Time】Setting MD valid period and alarm valid period. 【Action】Buzz, notify client,send e-mail. Spy C 【Output to】Choose the display channel.
om CCT V.c era Click adjust focus Click adjust aperture Click adjust lens Spy C am 3.2.2 PTZ Control Click up/down/left/right control pan&tliti or hold mouse left key adjust direction by drag the middle dot Preset ：choose preset from drop down list can control pt to the setting position. Click the mouse right key then choose 【set current view as a preset point】for preset .
CCT V.c om to stop the cruise.
om 3.2.3 Device List Display connected devices name, domain name, channel name ,etc. Click to pop device property dialog. Click 3.2.4 Interface Structure connect or disconnect device. CCT V.c device. Click to add Click following button can adjust your own display mode. Click click Click switch display mode, 1/4/6/8/9//12/16//20/25/30 optional am era delete. save or Spy C 3.2.5 Other Function 3.2.5.1 Screen Switch Click to start or stop screen switch ( mean the switch is in process).
3.2.5.2 Client_side Setup Client Setup Click om to setup record path/alarm trigger record period/sound/last time scene. More CCT V.c than one path can be saved, the top one will be the default record path. Video Switch Setting am era Record up limit 1024M/7200s It will realize multi-device or different channels switch in one screen.
om Local User Management CCT V.c era Default password is blank. After login, allow add new user and related password/private. Spy C am Password will be needed when quit under 【Full Screen】.
Automatic_Record will blink after start this function. 3.2.5.3 Playback pop following dialog, Search need file through catalog or event list. Double am Click era CCT V.c indicator om Allow time record channel/period setting, save path setting in【client setup】. The interface Spy C click to play the file.
om CCT V.c Please choose device IP under 【Device-side File】then click【Find】when check file in SD card. Mark1:Event mean trigger MD or alarm, event record mean MD or alarm trigger record. Mark2:Device port file mean file save in linked SD card. era 3.2.5.4 Language Version The software support Chinese and English, click switch. 3.2.5.5 Full Screen to change to full screen mode, all action will be locked under this mode, input am Click pop Spy C administrator password when quit.
Click om 3.3 Device property or choose IP address in device list, click 【Property】 by right key to pop dialog, setup or adjust IP address、DDN、PPPoE、broadcast configuration、user management、 update online,etc. CCT V.c 3.3.1 Address/Port Default IP address:192.168.0.233, subnet mask:255.255.255.0，gateway:192.168.0.1, service port 8001. After change, system will register you restart your device to valid the setup. Change Spy C am era service name not need restart.
server needs change to current DNS IP address also. 3.3.2 DDNS om Mark3: Outer net visit need mapping the service port, refer router configuration part. DNS DDNS mean dynamic DNS, for unfixed IP domain name mapping. This client software CCT V.c support peanut shell、3322 and our company DDNS service. Just apply your domain name in the proper network station(refer to Part3.2) then click 【OK】 in the pop dialog, the DDNS will valid. 【DDNS Service Provider】now support www.oray.net and www.3322.org.
om 3.3.3 PPPoE The client software allow PPPoE . Link the device to phone line through modem, dial to internet. User can visit the monitor picture by internet from long distance. Choose PPPoE in Spy C am era CCT V.c following dialog then input user name and password then click 【OK】.
Spy C am era CCT V.c Use set device as needed to realize the multicast function. om 3.3.
om 3.3.5 E-Mail When choose mail service, the device will send event report and picture to the appointed mailbox when alarm or MD triggered. 【SMTP Server】Follow your mailbox hints for related setup. 【SMTP Port】default 25. Account 】 Need according to the SMTP service if your mailbox CCT V.c 【 Sender’s support. 【User Account】auto catch account info. 【Password】Account related password. 【Receiver’s Account】Any mailbox which can receive mail.
om 3.3.6 Date/Time Spy C am era CCT V.c Adjust device date, time. Click【Same with PC】to synchronous with pc.
【channel】Allow setup name for choosed channel. om 3.3.7 Alarm In 【Actions take to response to alarm】Sound alarm, notice client , send e-mail. CCT V.c 【Output to 】Setup output channel. 【PTZ linkage】Seperate、preset、cruise. Moniter channel must be appointed when choose preset or cruise mode. 【Valid period of time】 Setup alarm input time period. + mean valid period,- Spy C am era mean except the period. Mark: The record in SD card will lead the real record time add 0-20s base the setting.
【channel】Allow setup name for choosed channel om 3.3.8 Alarm Out 【Valid period of time】Setup alarm output time period. + mean valid period,- Spy C am era CCT V.
【Video Channel】choose video channel. 【Address】Matching the PTZ address with protocol. 【Protocol】Support Palco-D & Palco-P, default is Palco-D. om 3.3.9 PTZ 【Step Length】 Range 1~64, default 32. High speed will make the control hard , CCT V.c suggest under 32 for high speed dome. Spy C am era 【Comm Setting】 Set baud rate, data bit, stop bit, parity bit.
【Channel】Choose the channel no. 【Name】Setup channel name. 【Resolution】QCIF / CIF / Half_D1 / D1. Spy C am era CCT V.c 【PAL/NTSC】Choose PAL or NTSC. om 3.3.10 Video Channel Mark1: Need restart device to valid new setup. Mark2: 4 channel DVS only support channel 1 set as D1 format.
【Channel Number】Choose the channel no. 【Bits Width】8bits / 16bits / 32bits optional. om 3.3.11 Audio Channel 【Sampling Rate 】The effect will better with frequency increase. Spy C am era CCT V.c 【Compression】Choose different mode to compress audio steam( about 10 tims). Mark: Suggest keep the default setting in normal. Just click open talk back function.
om 3.3.12 User User management is use to add, delete or modify user name and password, and setup corresponding authority. User name can only be English character or number,Chinese is no supported, maximum length of user name or password is 10 characters. User is separated into three classes: CCT V.c ◆ Normal User: Admit to brown monitor image, no authority to setup device and manage user.
om 3.3.13 Update User can update device local by client or long distance through IE. Device will auto restart after upgrade. User can check current version no. here. 【Current version 】Display current version, not allow edit. 【File to upload】 Click【Open】find the file then click【Upload】, the following Spy C am era shut off during the process. CCT V.c dialog will show the progress. The device will auto restart after upgrade, not Mark: Online upgrade file DAT is pk2.
om 3.3.14 Record The record property will auto display when link to SD card. In other condition, please click CCT V.c 【IP】→【Property】→【Record】to pop the dialog: Set file limit, 0 mean no limit am era Valid record period Mark1: Please cut off device before plug SD card. Spy C Mark2: Choose FAT32 type when format SD card.
om 3.3.15 Wireless NIC Wireless network card property will auto display; in other condition click 【IP】→【Property】 Spy C am era CCT V.
om 3.3.16 Miscellaneous（UPnP function） am era CCT V.c UPnP( Universal Plug and Play), the router will auto mapping TCP and UDP port.
4.1 LAN and WAN configuration ♦ LAN automatically search Run DVS Client, Click om 4 Other , the video server in the local LAN will appear in the device CCT V.c list. Only PC and video server in same network segment can connect. If there are no device in the device list, make sure the following question: ① If DVS is already powered? ② If DVS and PC have been normal connected? If yes, the light will be long bright or flashing.
om Appendix A IE mode When first visit device through IE, user need add http:// by manual to pop the following Click【 era CCT V.c dialog: 】 download the client and control , then install it.
