Installation & Assembly

ManualsBrandsCopeland Furniture ManualsFurnitureAudrey 2 Door on the Right Sideboard

Dining Buffet Instructions

Tools required

None

Instructions for the buffet types

pictured below. Please identify

the following items.

Hardware included:

Shelf pins (4 – a, b, c, d, e, f;

8 – g, h, i)

Component included:

Shelf (1 – a, b, c, d, e, f;

2 – g, h, i)

Silverware tray (1) (buffets with drawers)

Shelf

Shelf pin

Open the doors. Insert shelf support

pins into the holes in the case sides

and carefully place the shelf on them

(Figure 1).

Step 1: Insert shelves in doors

Figure 1.

Install the shelves

C a t a l i n aA u d r e y

3 drawers on left,

2 doors on right buffet

3 drawers on right,

2 doors on left buffet

2 door buffet

1 door on either side of

3 drawers buffet

4 door buffet

4 drawers on left, 1 drawer

Over 2 doors on right buffet

4 drawers on right, 1 drawer

Over 2 doors on left buffet

1 drawer over

2 door buffet

2 drawers over

4 door buffet

One shelf

Two Shelves

Step 2: Adjust the leveler

To level the case, there are levelers in

each of the four legs (Figure 2). The

levelers can be turned up and down to

make the unit level.

Figure 2. Lever the case

Summary of content (3 pages)

PAGE 1
Audrey Catalina Dining Buffet Instructions Hardware included: Instructions for the buffet types pictured below. Please identify the following items.
PAGE 2
Adjust drawer slides and doors Tools required None Press the handle How to release the drawer slides To remove drawers from the slides, press both handles on the front slide clips on the drawer bottom and firmly pull drawer forward (Figure 1). How to reinstall the drawer Front slide clips Figure 1. Release the slides Fully extend the drawer slides (from the case) and place drawer box on top of the slides. Pull each slide forward until it locks into both left and right slide clips.
PAGE 3
Page3 Safety Notification Copeland Furniture is in compliance with ASTM’s volunteer Standard Safety Specification for Clothing Storage Units (2014 revision) – commonly known as the furniture tip-over standard. It is strongly recommended that you install the anti-tip stop included with your furniture to help prevent a potential topover of the furniture onto a small child. For more information, please visit www.astm.org/Standards/F2057.htm.