Installation & Assembly

ManualsBrandsCopeland Furniture ManualsBedsModuluxe Clapboard Storage Platform Bed

Assembly Instructions for Moduluxe Storage Beds

Tools required

Phillips head screw driver

Instructions for the bed types

pictured below. Please identify the

following items.

Hardware included: Components included:

Headboard (1)

Attach 2 of the plywood decks across

the top near either end of the storage

rails using two 1 ½” pan screws for

each piece.

Step 1: Attach 2 plywood decks to

P a g e 1

Storage rails (2)

Allen wrench (1)

Plywood decks (7)

Veneer HDBD

Queen

King

Cal-King

Clapboard HDBD

Queen

King

Cal-King

Upholstery HDBD

Queen

King

Cal-King

Plywood ends (2)

Support legs (2)

1 ½” pan

head screw

Storage Rail

Plywood

Deck

Step 2: Attach plywood ends

Attach the plywood ends to either

side of the storage rails using two of

the 1” machine screws.

Plywood end

1” Allen head

machine screw

Allen wrench (provided)

Allen wrench

1 ½” pan head screws (16)

1” machine screws (4)

Rail hardware kit (1)

Footboard (1)

Storage Rail

the storage rails

Notice: Beds must be disassembled before moving to avoid damage. Never attempt to move the bed while it is

assembled. Failure to do so would void the warranty.

Summary of content (3 pages)

PAGE 1
Assembly Instructions for Moduluxe Storage Beds Hardware included: Instructions for the bed types pictured below. Please identify the following items.
PAGE 2
Page2 Tools required Step 3: Phillips head screw driver Install the headboard and footboard Attach the headboard and footboard to the storage rails by following the steps below. Be sure to thread the nut onto the end of the studs before attaching the side rail to either the headboard or footboard. Curved washer 1 2 Screw the threaded stud into the insert until it stops. Put the nut 3 to 6 turns onto the end of the threaded stud.
PAGE 3
Page3 Tools required Step 5: Phillips head screw driver Install all decks Headboard The middle deck has 2 sets of holes Attach the 5 remaining plywood decks across the top of the unit using the remaining 1 ½” pan head screws. Note the center deck piece has 2 sets of holes side-by-side. Storage Rail Footboard Care Instructions To care for and preserve the finish on your new Copeland Furniture piece, please keep the following recommendations in mind.