wee» 8 Regal” Reading/Writing Center Assembly Guide : For assistance, please contact RC107_2014 F : Copernicus © 1-800-267-8494 Sci crop Check out our other products online at Email info@copemicused com www.coparnicused.com Have your packing slip ready for reference + This product is meant to be assembled by an adult. WARNING + In its assembled state, small parts present a hazard. + To be used under direct supervision of an adult. Begs ose ce Ea Tei a ell le cl WWW .
“8 Regal” Reading/Writing Center Parts Before beginning, you should have: ~~ Contents Box 1 Hardware — Front Frame Actual Size ix “ Base @® M6 x 18mm 10x 20mm Stet paper = dn) Beholder © Wg x 26mm 38mm 4 Lower Frame ij 1 Loft, 1 Right = Upper Frame Barrel Nut | EN 12x ) M6 Com Nut Lock Washer Lock Washer u 12x | Removable Rear Whiteboard BE 1x (Not to scale} ick, Front Frames Support hd 1 aft, 1 Right x Hoe Contents Box 2 Open Tub 4% Yr Rs for to Tech Easel Upgrade Kit for RC108, RC168, and RCO tub packs :
3 a8 indivisibly Tips for Assembly Using this Manual Watch for These Helpful Symbols " ® This symbol denotes a 2 Person Task. For safety, please ensure that thees are two people working on steps displaying this symbol 2 Parson | « Walsh for this symbol throughout the Assembly Instructions. Wherever you see if, pay close B attention. The symbol denotes a step needing sirrah attention to ensure it is dons correctly.
Actual Size: You will need: (toot Seas) Base 7 Caster 2% 4x install Casters You should begin the installation with the brakes in the UP Position Front Press Casters firmly into the Base: + Casters will click into place + If necessary, tap the caster in using a rubber mallet.
Ach ae) © gn)? You will need: (toot Eerie) Es iin Stretcher 7 Upper Frail Rear Whiteboard bo 1 Left Right Hook 2% ox Build Rear Frame bee ® © re SGT Choose stretcher location based on which unit you are building. Note install Rear Whits hoard Hook % | ® before screwing stretcher into place 4 i % Ensure hook faces back of unit! ROOT Version £ 10 October 2014 Copernicus Educational Francis Inc.
Actual Size: An) © You will need: (toot Seas) Front Frame Support Tub Channel 1 Left, 1 Right 1x 2x Install Front Frame Supports Hee (RC108 RC109 RC110) #4 1 Front Frame Supports | i s angle outward 5 Choose hardware size based on which unit you are building. Same location for both units.
You will need: (toot Seas) Install Spacers Hee (RC108 RC109 RC110) Do NOT install Spacers if building a Tech Easel. Move onto the next step. MST Bran ‘You will need: (not to Seas) Front Frame Assembly k Whiteboard Shanna! ix 1x Build Front Frame Assembly 1. Slide whiteboard as far up as it will go. 2. Slide whiteboard channel up fo bosom of whiteboard. i 3. Fasten the whiteboard channel in place. Tighten bolts ROOT Version £ 10 October 2014 Copernicus Educational Francis Inc.
MSx35mm I (Not to Scag) sid i i Tighten bolts if ay Front Frame Assembly GREP Attach Whiteboard 1. Put brakes in the LOCKED / DOWN position fo help hold unit steady. 2. iris easiest to fasten the top first and then the bottom. Use bottom hole ‘You will need: (not to Seas) Safety Cap Premium Booking 1x Install Book Ledge Note the spring tension is us ‘signed to discourage children from unhooking the book lade ROOT Version £ 10 October 2014 Copernicus Educational Francis Inc.
You will need: (toot Seas) Open Tub 4x Place Tubs into Unit ‘You will need: (not to Seas) Chart Paps Hooks 2x Attach Chart Paper Hooks | Place an employ hardware a bag over the frame to avoid scratching the paint. ROOT Version £ 10 October 2014 Copernicus Educational Francis Inc.
You will need: (toot Seas) Rear Whiteboard x 1 Hang Rear Whiteboard Congratulations! Now you can go and enjoy your Regal” Reading and Writing Center &3 ROOT Version £ 10 October 2014 Copernicus Educational Francis Inc.
Regal” Reading/Writing Center Assembly Guide For assistance, please contact us: Copernicus © 1-800-267-8494 plea Check out our other products online at : Email www.coparnicused.com Have your packing slip ready for reference Dear Educator, Thank you for purchasing one of our products. I hope the assembly of your Regal” Reading and Writing Center went well. If you have any questions, or concerns, or ideas for how we can improve, please call us at 1-800-267-8494, where someone will be happy to help.
