User guide

Quick Setup with CME 2 Xenus XTL User Guide
118 Copley Controls Corp.
5.12: Completion Steps
5.12.1: Objective
Save the work and perform additional testing with load and under normal control source.
5.12.2: Steps
5.12.2.1 On the Main screen, click Save to Flash.
5.12.2.2 Remove AC power from connector J1.
5.12.2.3 Attach load.
5.12.2.4 Reconnect AC power to connector J1.
5.12.2.5 Re-tune velocity and position loops if applicable.
5.12.2.6 On the Main screen, click Save to Flash.
5.12.2.7 On the Main screen, click Save to Disk (for backup or duplication).
5.12.2.8 Click Control Panel and then click Reset
OR
Power-cycle the amplifier.
5.12.2.9 The amplifier tuning procedure is complete.