User guide

Xenus XTL User Guide Using CME 2
Copley Controls Corp. 121
6.1.3: Main Menu Overview
The CME 2 Main Menu choices are described below.
Menu Selection Description For More Information
Save Amplifier Data Saves contents of amplifier’s RAM to a
disk file.
Restore Amplifier
Data
Restores contents of an amplifier file
from disk to amplifier RAM.
Manage Amplifier and Motor Data (p.
125).
Restore CVM
Control Program
Prompts for a Copley Virtual Machine
program file. The program in this file will
replace the current program in flash.
This procedure also results in the setting
of the Indexer 2 Program option Enable
Control Program on Startup. This
configures the program to auto start
when the amplifier is powered up or
reset.
Copley Indexer 2 Program User
Guide.
Restore Cam Tables Prompts for a saved Cam Table file (.cct
file). All tables in amplifier flash will be
replaced by the ones in this file.
See Copley Camming Users Guide.
File
Exit Closes CME 2. Prompts for data-saving decision.
Basic Setup Opens Basic Setup screen. Basic Setup (p. 73).
Control Panel Opens Control Panel. Control Panel (p. 130).
Auto Phase Opens Auto Phase tool. Auto Phase (p. 102).
Scope Opens Scope. CME 2 User Guide.
Error Log Opens Error Log. CME 2 User Guide.
Amplifier Properties Displays basic amplifier properties.
CAN/DeviceNet
Configuration
Opens the CAN or DeviceNet
Configuration screen.
Rename Prompts for new amplifier name. Renaming an Amplifier (p. 124).
Amplifier
Auto Tune Auto Tune for Linear Servo Motors. CME 2 User Guide.
Communications
Wizard
Starts sequence of prompts to set up
serial port.
Serial Port Setup (p. 69).
Communications Log Opens Communications Log. CME 2 User Guide.
Download Firmware Starts prompts to download new
firmware image from disk to amplifier.
Downloading Firmware (p. 128).
Download CPLD
Program
Starts prompts to download PLD code
from disk to amplifier.
Download FPGA
Program
Starts prompts to download FPGA code
from disk to amplifier.
Firmware Recovery Starts prompts to recover amplifier when
a firmware download was interrupted.
CME 2 User Guide.
Manual Phase Opens Manual Phase tool. CME 2 User Guide.
View Scope Files Opens Trace Viewer window. CME 2 User Guide.
I/O Line States Opens I/O Line States window.
Tools
CME 2 Lock/Unlock Opens screen for locking and unlocking
CME 2 functionality.
CME 2 User Guide.
ASCII Command
Line
Opens screen to accept ASCII format
commands.
CME 2 User Guide.
Continued…