User guide

Xenus XTL User Guide Wiring

Copley Controls Corp. 51

4.4: Regen Resistor (J3) (Optional)

Mating Connector

Description Euro-style, 5 position, 5.0 mm pluggable male terminal block.

Manufacturer PN

Wago: 51111277 or 721-605/000-043/RNn01-0000

Wire Size 22 - 12 AWG

Recommended Wire 18 A models: 14 AWG, 600 V

36 A and 40 A models: 12 AWG, 600 V

Shielded cable required for CE compliance

Wire Insertion/Extraction Tool Wago: 231-131

Standard connector and tool are included in connector kit XTL-CK or XTL-CA

Pin Description

Pin Signal Function

1 Regen + + DC Bus to one side of regen resistor

2 N/C No connection

3 Regen - Collector of regen transistor to one side of regen resistor

4 N/C No connection

5 Ground Enclosure ground and cable shield

Regen Resistor Wiring Diagram

Regen

DC Bus

Fuses

(optional*)

Regen

Resistor

Enclosure

Amplifier J3

J3-5

J3-4

J3-3

J3-2

J3-1

*Fuses may be required by local electrical codes

Regen Resistor Fusing

Recommended Fuses:

Regen Resistor Fuse type

XTL-RA-03 Cooper Bussman KLM-8, Littelfuse KLKD008, Ferraz Shawmut ATM-10 or equivalent.

XTL-RA-04 Cooper Bussman KLM-12, Littelfuse KLKD012, Ferraz Shawmut ATM-15 or equivalent.

User Supplied See Regen Resistor Sizing and Configuration (p. 137).