User guide

Xenus Plus User Guide Wiring
Copley Controls 83
4.2: AC Mains (J1) XEL/XPL/XML/XE2/XP2/800-
1782/800-1808
The Mains connector information below is true for all of the Xenus Plus drives.
Mating Connector
Description
Euro-style 7,5 mm pluggable female terminal block with preceding ground
receptacle.
Manufacturer PN
Wago: 721-204/026-045 (Note 1)
Wire size
22 - 12 AWG
Recommended Wire
18 A models: 14 AWG, 600 V
20 A, 36 A and 40 A models: 12 AWG, 600 V
Shielded cable required for CE compliance
Wire Insertion/Extraction Tool
Wago: 231-131
Connector and tool are included in Connector Kits XEL-CK, XE2-CK, XML-CK, XPL-CK and XP2-CK.
Note 1: For RoHS compliance, append “/RN01-0000” to the part numbers listed above.
Pin Description
Pin
Signal
Function
1
L1
AC power input (hot or L1)
2
L2
AC power input (neutral or L2)
3
Protective ground
Chassis safety ground
4
L3
AC power input (L3)
AC Mains Fuse Recommendation (All Xenus Plus models)
Recommended fuse type: Class CC, 600 Vac rated, Ferraz-Shawmut ATDR, Littelfuse CCMR,
Bussman LP-CC, or equivalent.