User guide

Installation, Startup, and Interface Tour CME 2 User Guide
16 Copley Controls
2.3: Configure Serial Port Parameters
One or more serial ports on a PC can be used to connect amplifiers. Use the following
instructions to add ports for amplifiers, to choose baud rates for those ports, and to
remove ports for amplifiers.
1
Double-click the CME 2 shortcut icon on the Windows desktop to start CME 2.
If communications has not been set up, the Communications Wizard Select device
screen appears.
2
If the CME 2 Main screen appears instead of Select device,
choose ToolsCommunications Wizard.
3
Choose Serial Ports and click Next to open the Communications Wizard Select
Ports/Serial Ports screen.
4
From the Available Ports list, choose the serial ports that will be used for amplifiers.
 To allow an amplifier to connect through a port, select the port name and click Add.
 To remove a port from Selected Ports, select the port name and click Remove.
Continued…