User guide

Scope Tool CME 2 User Guide
160 Copley Controls
15.8: Measurement Tab
The Measurement tab allows you to measure and analyze data from up to three
parameters during an interval defined by adjustable cursors. The Cursor Data area
displays a parameter’s values at the left and right cursor locations, and the difference
between the two values. The Analysis area displays the minimum, maximum, average,
and root mean square of the parameters during the cursor period.
Cursors
Cursor raw data
Cursor data analysis
When Show Cursors is not set, the Cursor Data fields are inactive and the Analysis fields
show calculations based on data from the entire trace cycle.
Basic Measurement Operations
1
To display cursors and activate the Cursor Data fields, set Show
Cursors.
2
To move a cursor, click on the cursor and hold the left button while dragging the cursor
to the desired location. Release the left button to place the cursor in the new location.
3
To select a parameter to measure and analyze within the cursors, choose a channel in
one of the three channel lists on the Measurement tab: