User guide

Installation, Startup, and Interface Tour CME 2 User Guide

18 Copley Controls

2.4: Configure CAN Network Parameters

A CAN port can be used to connect the host PC to one or more amplifiers. Use the

following instructions to configure CAN network settings.

Double-click the CME 2 shortcut icon on the Windows desktop to start CME 2.

If communications has not been set up, the Communications Wizard Select device

screen appears.

If the CME 2 Main screen appears instead of the Select device screen,

choose ToolsCommunications Wizard.

Choose CAN Network and click Next to open the Communications Wizard Configure

CAN Network screen.

Choose the appropriate CAN Card, Channel, and Bit Rate, and click Finish.

NOTES:

1) The CAN Card list shows the manufacturer names of all supported CAN cards that

have been connected to the PC and for which drivers have been installed.

2) All amplifiers must be set to the same bit rate (default is 1 Mbit/s).