User guide

Filters CME 2 User Guide

182 Copley Controls

C.1: Setting Parameters

To change or view filter configurations follow these steps:

Choose the Configure Filters button from the main screen to open the

Filter Configuration screen.

To view present filter settings choose the Filter Settings tab. Choose other tabs to

configure Analog, V Loop, I Loop or Input Shaping settings.

C.2: Filter Configuration Windows

Along with the location of a cut-off frequency on the filter curve, there are several filter

configuration parameters available depending on the initial choice of C.3: Standard Filter

Types (p. 184) and C.4: Standard Filter Families (p. 186).

Filter configuration choices may include:

 Number of Poles (the location of a cut-off frequency on the filter curve)

 Cut Off Frequency

 Frequency 2 (If two poles are chosen)

 Pass Band Ripple

 Stop Band Ripple

C.2.1: Filter Settings

The Filter Settings tab opens a window that shows what filters have been selected.