User guide
CME 2 User Guide Installation, Startup, and Interface Tour
Copley Controls 23
2.8.2: Main Menu Overview
The CME 2 Main Menu choices are described below.
Menu
Selection
Description
For More Information
File
Save MACRO File
(MACRO amplifiers only.) Saves
amplifier setup and tuning
parameters in a format that can
be read by Delta Tau controllers.
Save MACRO File for Delta Tau
Controllers (p. 170).
Save Amplifier
Data
Saves contents of amplifier RAM
to a disk file.
Data, Firmware, and Logs (p.
167).
Save AsV4.1
Format
Saves amplifier data file in format
usable by CME 2 Version 4.1.
RestoreAmplifier
Data
Restores contents of an amplifier
file from disk to amplifier RAM.
RestoreCVM
Control Program
Prompts for a Copley Virtual
Machine program file. The
program in this file will replace
the current program in flash.
This procedure also results in the
setting of the Indexer 2 Program
option: Enable Control Program
on Startup. This configures the
program to auto start when the
amplifier is powered up or reset.
Copley Indexer 2 Program User
Guide.
RestoreCam
Tables
Prompts for a saved Cam Table
file (.cct file). All tables in
amplifier flash will be replaced by
the ones in this file.
See Copley Camming Users
Guide.
RestoreGain
Scheduling Table
Prompts for a saved Gain
Scheduling Table (.ccg file).
Gain Scheduling (p. 221).
Exit
Closes CME 2.
Amplifier
Basic Setup
Opens Basic Setup screen.
Basic Setup (p. 33)
Control Panel
Opens Control Panel.
Control Panel (p. 147)
Auto Phase
Opens Auto Phase tool.
Motor Phasing (p. 93)
Scope
Opens Scope Tool screen.
Scope Tool (p. 153)
Error Log
Opens Error Log screen.
Error Log (p. 172)
Amplifier
Properties
Displays basic amplifier
properties.
Network
Configuration
Opens the CAN Configuration
screen.
CAN: Network Configuration
(p. 81).
Rename
Prompts for new amplifier name.
Rename an Amplifier (p. 20)
Auto Tune
Opens Auto Tune for Linear Servo
Motors.
Auto Tune all Loops for Linear
Motors (p. 133)
Gain Scheduling
Opens Gain Scheduling screen.
Gain Scheduling (p. 221).
Continued…