User guide

CME 2 User Guide Amplifier Setup Procedure

Copley Controls 29

3.2: Setup Procedure

Prepare for setup



Understand this procedure’s Warnings and Notes (p. 28).



Verify that amplifier power is OFF.



Verify wiring and connections.



Make sure motor is securely fastened with no load connected.



Apply power to the amplifier.

For off-line amplifiers apply 24V only.

For DC amplifiers apply AUX HV only.

Start CME 2 and enter Basic Setup parameters



Double-click CME 2 icon on the Windows desktop to start CME 2.



If necessary, Connect to an Amplifier in CME 2 (p. 20) from the list in the Copley

Neighborhood tree.



If the Basic Setup screen does not appear, click the Basic Setup button.



Choose:

In most cases, click Change Settings to Change Basic Setup

Settings (p. 34).

Then proceed to Step 3 of this Setup Procedure,

Enter Motor/Feedback/Brake Stop parameters (p. 30).

To load a .ccx file that was prepared for the amplifier/motor

combination, see Copy Amplifier Data (p. 177). Then proceed to

Step 13 of this Setup Procedure, Test with load attached (p. 32).

To complete the setup for a ServoTube motor, click ServoTube

Setup and see ServoTube Setup (p. 39).

Continued…