® Antimicrobial Surface Patches Your new weapon in the fight against disease causing microorganisms www.copperclean.
Copper Clean® Antimicrobial Copper Surfaces deliver continuous and ongoing antibacterial action, killing greater than 99% of bacteria* within two hours. *Laboratory testing shows that, when cleaned regularly, antimicrobial copper surfaces kill greater than 99.9% of the following bacteria within 2 hours of exposure: MRSA, VRE, Staphylococcus aureus, Enterobacter aerogenes, Pseudomonas aeruginosa, and E. coli O157:H7.
Maintenance Copper Clean® Antimicrobial Patches are designed to supplement, not replace, regular cleaning and sanitizing efforts. • Once patches are applied, continue regular cleaning and sanitizing procedures on patch and surrounding surfaces. Cleaning can be done with any standard household or facility grade cleaning solutions. • Strong acids, bases, and oxidizers can degrade the surface (we DO NOT recommend using undiluted bleach, for instance) but most pre-mixed cleaning solutions are acceptable.
DIRECTIONS FOR USE Caution: Copper Clean® Antimicrobial Patches are made from real metal foil. The edges of the product may be SHARP. Take care when handling, applying, and removing the product. Preparation Application • Without removing adhesive backing, test fit patch on target surface to determine if it will provide appropriate coverage. You can also use provided paper templates to test the fit. • Determine where you prefer patch seam to lie on target surface.