Specification Sheet

Lever Specications & Options
ANSI / BHMA ANSI 156.2 Grade-1.
Rose Diameter 3-1/2”.
Cylinder 6 pin C std.- 6 pin KW1 optional .
Keying
As specied: Available Master keyed,
Builder keyed, KD, KA.
Thru-Bolt
(auxiliary)
2 standard, removable.
Latch
2-3/4” backset, 2-3/8” optional.
1-1/8” square corner wide faceplate std.
Strike
PT-LS22: 4-7/8” ASA-Strike Std.
PT-LS12: 2-3/4” T-Strike opt.
Door Prep
1” edge bore, 1-1/8” x 2-1/4” latch mor-
tise, 2-1/8” cross bore, 2-3/4” backset
standard, 2-3/8” optional.
Clutch Standard.
Door Thickness Min 1-3/8”, Max 1-3/4”.
Handing All, 7200 levers are non-handed.
U.L. 3 hour, U.L. Labeled Fire Rated.
Warranty Lifetime Mechanical, 2 year Finish.
Stocking
Finish
Special Order
Finishes
Case
Qty
Case
Wt
Case
Size
SS 10B AB PB PS Units LBS LxWxH
x x x x x 6 12 15x9x12
Bulldog Commercial Hardware
7200 Series ANSI/BHMA Grade-1
Heavy Duty Commercial Lever Specications
BULLDOG
Commercial Hardware
Function Operation
7220 - Passage
Both levers always free turning. No
locking operation.
7231-Restroom
Inside push-button locks both levers.
Lever can be opened from outside by
turning outside privacy mechanism.
(emergency egress & kickoff equipped).
7241-Entry
Key or inside push button locks both
levers. Turning inside lever or key
unlocks both levers. Pushing & turning
inside push button activates “Storeroom
Function”.
7250-Storeroom
Inside lever is free turning. Outside
lever is always locked and can only be
unlocked with key inserted and turned.
7260-Classroom
Outside lever locked or unlocked with
key. Inside is always free.
UL LISTED
Meets ADA
Regulations