Dimensions Guide

Handleset Specications & Options
Construction Solid Cast Zinc Handleset & Rosette.
Cylinder Brass 5 pin KW1 std., 5 pin “C” optional.
Keying
As specied: Available Master keyed,
Builder keyed, KD, KA
Latch
Adjustable backset, 1” round corner narrow
faceplate std. Square corner or drive-in
adjustable optional.
Strike
Plain latch: Full lip round corner.
Deadbolt: 2-1/4”x 1” round corner.
Others available.
Door Prep
Edge bores 1”, latch mortises 1”x 2-1/4”,
cross bores 2-1/8”, backsets standard
2-3/8”, optional 2-3/4”. Hole spacing
5-1/2” for thumb latch and deadbolt latch..
Door
Thickness
Min 1-3/8”, Max 1-3/4”. Thick door kits
for 2-1/4” doors available.
Handing Non-handed.
UL Labeled Available 20-minute UL Labeled.
Warranty Lifetime mechanical, 5 year nish.
Available Finishes
Case
Qty
SKU # SS TB AB AN BC PB PS
Units
Colonial x x x x x x x
6
Heritage x x x x x
6
Sectional - 2 Piece
Residential Handleset Specications
Function Operation
2610
Active
Deadbolt thrown by rotating interior
turn-piece or exterior key. Plain-latch
retracted by interior knob/lever or
exterior thumb piece.
2620
Double Cylinder
Deadbolt thrown by rotating interior
or exterior key. Plain-latch retracted
by interior knob/lever or exterior
thumb piece.
2690
Dummy
Non-active function. Exterior gripset
and interior knob/lever act as pull
only.
Available UL
LISTED
HZ2610
Heritage
CZ2610
Colonial
A
D
C
E
B
F
CZ HZ FZ
A Cross Bores on Center
5-1/2” 5-1/2” 5-1/2”
B
Plain Latch to Thru-bolt
(on Center)
8-7/16” 8-7/16” 8-7/16”
C
Deadbolt Rose Height
“ “ Width
3-3/8”
2-5/8”
3-1/2”
2-3/8”
3-1/2”
2-5/8”
D
Main Escutcheon Height
“ “
Width
4-1/8”
3”
4-3/8”
2-3/4”
4-1/2”
2-5/8”
E Overall Gripset Height
12”
12” 13-1/4”
F
Lower Escutcheon Height
“ “ Width
2-7/16”
1-7/8”
2-9/16”
1-5/8”
3.0”
1-1/2”
FZ2610
Fashion