Specifications Sheet

Copper Creek Hardware
ANSI Grade-3
Contemporary Lever Specications
Available UL
LISTED
Meets ADA
Regulations
Lever Specications & Options
ANSI / BHMA Exceeds ANSI Grade-3 - 200,000 cycles
Rose
Diameter
2-5/8” with concealed screws
Cylinder KW1 5 pin std, “C” optional.
Keying
As specied: Available Master keyed,
Builder keyed, KD, KA.
Latch
Adjustable backset, 1” round corner nar-
row faceplate std. Square corner or drive-
in adjustable latch optional.
Strike
PT-LS06: 2-3/4” full lip round corner
strike std.
Door Prep
Edge bore 1”, latch mortise 1”x 2-1/4”,
cross bore 2-1/8”, backset standard
2-3/8”, optional 2-3/4”.
Door Thickness Min 1-3/8”, Max 1-3/4”.
Handing Non-handed
UL Labeled Available 20-minute U.L. Labeled.
Warranty Lifetime mechanical, 5 year nish.
In Stock Finish
Case
Qty
STYLE
SS TB PS
Units
RL (SQ or RND) x x x
18
VL x x x
ML x x x
Function Operation
2220
Passage
Passage: Both levers always free turning.
No locking operation.
2231
Privacy
Inside push button locks or unlocks both
levers. Rotating inside lever unlocks al-
lowing for emergency egress.
2240
(Remi only)
Keyed Entry
Outside key or inside turn-button locks both
levers.
2290
1/2 Dummy
1/2 Dummy - Used as pull or decorative
trim only.
A
B
C
D
A B C D
RL (SQ) 4-7/8” 2” 2-5/8” 1-3/4”
RL (RND) 4-7/8” 2” 2-5/8” 1-3/4”
VL 4-1/4” 2-1/4” 2-5/8” 1-5/8”
ML 4-1/4” 2-1/4” 2-5/8” 1-3/4”
Modern (ML)
Remi (RL)
Remi (RL)
RND
Verona (VL)