User's Manual

User Manual
C-One e-ID x / MR2xxx
13/18
6.5 READ A CONTACTLESS CARD
6.5.1 Hardware
The C-One e- ID x / MR2xxx integrates a Smart card contactless reader at the bottom of the device.
(Photo non-contractual)
6.5.2 Software
The PCSC Sample can be used to communicate with a smart card using APDU (Source code of the application is
available in Coppernic SDK).
Select the “Elyctis CL
Reader 0” in the list
Click Connect to
start communication
with the reader
Enter an APDU in
hexadecimal format
and click on ‘send’.
Reader data output
will be display in this
log view
RFID smart
card reader