User Manual

11
7.5 Eject All Discs: Performs a simultaneous ejection of all of the optical disk drive(s) on
the duplicator.
 Press ENT  All disc trays will open
7.6 Copy Counter: Tracks the numbers of successful and failed copies made by the
duplicator for both CDs and DVDs. There are three (3) parts of this tool: Show Count
(to display current copy counter),Enable Counter (to turn the counter on or off) and
Reset Counter (to clear counter).
7.6.1 Show Counter

Press
ENT


Press
ENT

7.6.2 Enable Counter
 Press ENT 
 Press
ENT 

  or  and press ENT to select
choice
7.6.3 Clear Counter

Press
ENT


Press
ENT


Press ENT to confirm or press to ESC
cancel 
7.7 Update BIOS: Updates the BIOS (firmware) of the duplicator.
 Press ENT
 Insert update CD
and press ENT 


Update completed
and eject disc 
 Re-boot system
8. Setup – This command contains options to configure the duplicator system.
8.1 Auto Start Time: Set the amount of time before the duplicator will automatically
start the selected command ranging from OFF (no auto start) to 99 seconds in 1-second
increments (1, 2, 3….97,98, 99).