User Manual

12
 Press
ENT 
  or  to select seconds and
press ENT to confirm
8.2 Display Mode: Changes the display readout during the performance of various
commands.
 Press
ENT 
  or  to select mode and
press ENT to confirm
8.2.1 Basic: The “Basic” mode displays a progress bar, along with the amount of total
data in MB on the master DVD (or in time for the master CD).
8.2.2 Show Timer: Allows the display of total time taken for the copy process to be
complete.
 Press
ENT 
  or  to select mode and press
ENT to confirm
8.2.3 Show Speed: Displays the speed at which discs are read and writing during
various processes.
8.3 Button Beep: Turns the audio signal (a beeping sound) ON or OFF for pressing of
the buttons.
 Press
ENT 
  or  to select mode and
press ENT to confirm
8.4 Eject On Start: Allows the drive(s) with disc(s) present inside to eject the disc trays
when the machine is done initializing.
 Press
ENT 
  or  to select Eject All/
No Eject/ Eject Target/ Eject
Source and press ENT to
confirm
8.4.1 Eject All Discs: Performs a simultaneous ejection of all of the optical disk drive(s)
on the duplicator.
 Press ENT  All disc trays will open
8.4.2 Do Not Eject: Do not eject any disc.
8.4.3 Eject Target Only: Eject writer drive only.
8.4.4 Eject Source Only: Eject reader drive only.