User Manual

13
8.4.5 Eject All Trays: Eject all drives.
8.5 Reader Speed: Sets the reader speed for the duplicator to read the master disc(s).
The speeds for CD are: 1, 2, 4, 8, 10, 12, 16, 20, 24, 32, 36, 40, 44, 48, 52, 56
(default), MAX. The speeds for DVD are: 1, 2, 2.4, 4, 6, 8, 10, 12, 16, 18, 20
(default), MAX.
 Press
ENT 
  or  to select
CD Read and press ENT 

  or  to select DVD read speed
and press ENT to finish.
8.6 Compare Speed: Sets the speed at which the master disc is compared with the
copies disc(s). The speeds for CD are: 1, 2, 4, 8, 10, 12, 16, 20, 24, 32, 36, 40
(default), 44, 48, 52, 56, MAX. The speeds for DVD are: 1, 2, 2.4, 4, 6, 8, 12, 16
(default), 18, 20 MAX.
 Press
ENT 
  or  to select CD
Compare Speed and
press ENT 

  or  to select DVD Compare
speed
and press ENT to finish
8.7 Language: Sets the language selection of the display. Available languages are:
English (default), Spanish, Portuguese, and Japanese.
 Press
ENT 
  or  to select
language and press ENT
to confirm
8.8 Clear Setup: Resets the duplicator back to factory default settings.
 Press ENT 
 Press
ENT to
confirm

 Press ENT to clear all settings
8.9 ADVANCED SETUP: This menu is for the more advanced functions of the duplicator,
including changing the duplicator display, updating writer drive(s) of specific brands,
setting the loop and time parameters for the burn-in process to test the machine, and
performing firmware rollbacks to earlier versions. Note: The Advanced Setup is hidden within the
Setup Menu (step 11). To access Advanced Setup, navigate to Setup Menu, then press and hold down the scroll
buttons simultaneously until the menu stop looping.
8.9.1 Power On Time: Set the amount of time the duplicator counts down
before initializing the system. The default is 15 seconds. The time can be set from 5 to 99
seconds in 1-second increments (5,6,7….97,98,99).

Press
ENT 
  or  to select
seconds and press ENT to
confirm