User Manual

ManualsBrandsCopystars ManualsComputers & AccessoriesDVD Duplicator Sata CD-DVD Burner 24X 1 to 1 DVD Copier Duplicator Tower

To start the Copy & Compare process:

1. Power on the machine (if not already on).

2. Eject disc tray of the Source Drive and place the master disc in the designated

Source Drive (usually the top). The “master disc” is the original of which

copies are made.

3. Eject disc tray(s) of the Writer Drives and place blank disc(s) on the

tray(s). Number of drives used depends on number of copies desired. It is

not necessary to always use all drives.

4. Use the scroll buttons to select the “4. Copy & Compare” command and

press the ENT button. The drives will automatically close trays and begin

the copy process.

5. Once the copy process is complete, the tray(s) will open briefly, and then

automatically close again to begin the compare process.

6. Once the compare process is completed, the trays will automatically eject discs that

have passed the Copy & Compare process.

5. Set Burn Speed – This feature allows you to set the burn speed of various types of disc:

general CDs (data and VCDs), audio CDs, DVDs and dual-layer DVDs (DVD DL).

Selectable burn speeds:

CD: 1, 2, 4, 8, 10, 12, 16, 20, 24, 32, 36, 40 (default), 44, 48, 50, 52, 56 MAX.

Audio CD: 1, 2, 4, 8, 10, 12, 16, 20, 24 (default), 32, 36, 40, 44, 48, 50, 52, 56 MAX.

DVD: 1, 2, 2.4, 4, 6, 8 (default), 12, 16, 18, 20, 22, 24, MAX.

DVD DL: 1.2 (default), 2.4, 4, 6, 8, 12, 16, 18, 20, 22, 24, MAX.

BD: 1, 2 (default), 4, 6, 8, MAX.

To Set the Burn Speed:

1. Power on the machine (if not already on)

2. Use the Scroll buttons to select “5. Set Burn Speed”. Press the ENT button.

3. The first speed selection is for general CDs. Use the Scroll buttons to select the

desired burn speed and press the ENT button.

4. The second speed selection is for audio CDs. Use the Scroll buttons to select the

desired burn speed and press the ENT button.

5. The third speed selection is for DVDs. Use the Scroll buttons to select the desired

burn speed and press the ENT button. Note: The selection is only available on DVD duplicators.

6. The last speed selection is for DVD DL. Use the Scroll buttons to select the desired

burn speed and press the ENT button. Note: The selection is only available on DVD duplicators.

 Press ENT to

load disc 

 Analyzing

source disc 



 Start copying 



Copy completed

and start Compare 

Finish and eject

discs

 Press ENT &

 or  

  or  and press

ENT to set general

data CD burning speed

