User manual

13
D726
B
Colocar les tapas (B) sobre los extremos del perfil y
en los agujeros para la bisagra.
Separar las piezas A, B, C, D segœn se indica en la
figura.
Apoyar la gu’a (A) sobre la parte interior de la
puerta del mueble arriba y abajo segœn se indica en
la figura y marcar la posici—n de los agujeros
exteriores. Una vez que se hayan hecho los
agujeros, fijar la gu’a con los tornillos presentes en
el equipo base.
Introducir la tapa (C), presion‡ndola hasta o’r el
resorte, en la gu’a (A).
20 mm
A
50mm
PR166
PR266
A
B
C
D
PR33
C
A
16
CONTENTS
Warnings 15
Use 17
Cleaning the interior 17
The control panel 17
Starting 17
Quick-freezing 17
Warning light 17
Freezing fresh food 17
Storage of frozen food 18
Thawing 18
Ice-cube production 18
Temperature regulation 18
Fresh food refrigeration 18
Movable shelves 19
Positioning the door shelves 19
Hints 20
Hints for refrigeration 20
Hints for freezing 20
Hints for storage of frozen food 20
Maintenance 21
Periodic cleaning 21
Periods of no operation 21
Interior light 21
Defrosting 21
Customer service and spare parts 22
Installation 23
Location 23
Electrical connection 23
Instructions for totally built-in appliances 24
connecting the appliance to allow the oil to flow
back in the compressor.
Environment Protection
This appliance does not contain gasses which
could damage the ozone layer, in either its
refrigerant circuit or insulation materials. The
appliance shall not be discarded together with
the urban refuse and rubbish. Avoid damaging
the cooling unit, especially at the rear near the
heat exchanger. Information on your local
disposal sites may be obtained from municipal
authorities. The materials used on this appliance
marked by the symbol are recyclable.