REFRIGERADOR FRIDGE FE 1240 S/0 LIBRO DE INSTRUCCIONES INSTRUCTION BOOKLET 2222 103-41
WARNINGS It is most important that this instruction book should be retained with the appliance for future reference. Should the appliance be sold or transferred to another owner, or should you move house and leave the appliance, always ensure that the book is supplied with the appliance in order that the new owner can be acquainted with the functioning of the appliance and the relevant warnings.
Environment Protection This appliance does not contain gasses which could damage the ozone layer, in either its refrigerant circuit or insulation materials. The appliance shall not be discarded together with the urban refuse and rubbish. Avoid damaging the cooling unit, especially at the rear near the heat exchanger. Information on your local disposal sites may be obtained from municipal authorities. The materials used on this appliance marked by the symbol are recyclable.
USE Cleaning the interior ¥ how often the door is opened; Before using the appliance for the first time, wash the interior and all internal accessories with lukewarm water and some neutral soap so as to remove the typical smell of a brand-new product, then dry thoroughly. ¥ the quantity of food stored; ¥ location of appliance. Do not use detergents or abrasive powders, as these will damage the finish. Operation Insert the plug into the wall socket.
HINTS Hints for refrigeration provided. Meat (all types): wrap in polythene bags and place on the glass shelf above the vegetable drawer. Butter and cheese: these should be placed in special airtight containers or wrapped in aluminium foil or polythene bags to exclude as much air as possible. For safety, store in this way only one or two days at the most. Milk bottles: these should have a cap and should be stored in the bottle rack on the door. Cooked foods, cold dishes, etc..
overflowing and dripping onto the food inside. Use the special cleaner provided, which you will find already inserted into the drain hole. Important: Never use sharp metal tools to scrape off frost from the evaporator as you could damage it. Do not use a maechanical device or any artificial means to speed up the thawing process other than those recommended by the manufacturer.
INSTALLATION Electrical connection Before plugging in, ensure that the voltage and frequency shown on the serial number plate correspond to your domestic power supply. Voltage can vary by ±6% of the rated voltage. For operation with different voltages, a suitably sized auto-transformer must be used. The appliance must be earthed. The power supply cable plug is provided with a contact for this purpose.
Rear spacers The plastic bag containing all relevant documentation also contains two rear wall spacers to be fitted into special slots on the back of the appliance. Fit the spacers into the slots, taking care to ensure that the arrow (A) is positioned as shown in the figure. Next, turn them through 45¡ (arrow in vertical position) until they lock into place. A 45° PR60 Door reversal Unplug the appliance before all operations. To reverse the door, proceed as follows: 1.
