User manual

Figure 3.6: Fluidmesh 3100 pole mounting adapter.
3.2.1 Proper Installation Procedures
The FM3100 comes with a pole-mounting adapter, shown in Fig. 3.6, that
allows the installer to change the alignment of the antenna along both the
vertical and the horizontal axis.
3.2.2 Powering on an FM3100
The unit can be powered only with the Power-over-Ethernet injector pro-
vided with the FM3100 (Fig. 3.7). The PoE injector does not comply with
the 802.3af standard and therefore it cannot be substituted with a different
injector.
Figure 3.7: Fluidmesh 3100 Power-over-Ethernet injector.
The PoE injector must be powered 100-240V 50-60Hz AC using the AC
adapter included.
13