User manual

5 Fluidmesh Network
Addressing
5.1 Bridge IP Addressing
The FM unit can be operated in bridge mode to create a single point-
to-point connection between two network segments as described in Sec-
tion 4.1.
Each FM unit is provided with a default IP address for its wired Ethernet
port(s), which is:
192.168.0.10
No IP address is associated to the wireless interface.
When you set up a wireless bridge using two FM units for the first time,
both units will have the same default IP address equal to 192.168.0.10. It is
recommended to change the IP address of one of the two units in order to
unambiguously address and configure the system with no confusion (see
Fig. 5.1).
Figure 5.1: Wireless network architecture and initial bridge configuration.
20