Instruction manual
8-1
8 ANALOG BLACK SIGNAL SETTINGS (BLK SETTING)
The BLK SETTING is used to set the analog black output signal.
To display the BLK SETTING, press the MENU key repeatedly until BLK SETTING is
displayed. After the BLK SETTING is displayed, select the item to be set by using the [t] and
[u] keys.
The following sections only describe the "BLACK 1, 2 SIGNAL", however, the same
procedure can also be used for the "BLACK 3, 4 SIGNAL" and "BLACK 5, 6 SIGNAL".
8.1 Setting Format
The FORMAT is used to select the analog black signal format.
Table 4-1, "Format list" lists the selectable formats.
● Format Selecting Procedure
This format can also be selected by using the FORMAT key.
Refer to Section 4.4, “Format Key”.
This screen is used to set the analog black signal 1, 2.
This screen is used to set the analog black signal 3, 4.
This screen is used to set the analog black signal 5, 6.
１．ＢＬＫ ＳＥＴＴＩＮＧ
u
ＢＬＡＣＫ１，２ ＳＩＧＮＡＬ
１．ＧＬ ＳＥＴＴＩＮＧ
v
ＢＬＡＣＫ３，４ ＳＩＧＮＡＬ
１．ＧＬ ＳＥＴＴＩＮＧ
t
ＢＬＡＣＫ５，６ ＳＩＧＮＡＬ
Display the FORMAT by using the [
5
] and [
6
] keys.
Press the ENTER key.
Press the ENTER key.
１．ＢＬＫ ＳＥＴＴＩＮＧ
u
ＢＬＡＣＫ１，２ ＳＩＧＮＡＬ
２．ＢＬＡＣＫ１，２ ＳＩＧＮＡＬ
u
ＦＯＲＭＡＴ
３．ＢＬＡＣＫ１，２ ＦＯＲＭＡＴ
v
５２５ｉ／５９．９４
Selecting the signal to be set by using the [
5
] and [
6
] keys.
３．ＢＬＡＣＫ１，２ ＦＯＲＭＡＴ
v
＊５２５ｉ／５９．９４
Press the ENTER key. Press the MENU key to cancel.
Select the format by using the [
5
] and [
6
] keys.
"*" is displayed before the selected format.