MANUAL DE INSTRUCCIONES INSTRUCTION BOOKLET LAVAVAJILLAS DISHWASHER LV 6041 I
Attention The appliance which you have just bought is supplied not only with this instruction manual, but also with a Warranty Card Certificate, on the back of which are written the relative conditions. Please fill in the necessary details on the Card Certificate and send it to the Corberó Centre relative to the area in which the appliance is to be installed, within twenty days of the date of purchase. (See list of Corberó network centres). We congratulate you on your choice.
Contents For the user For the installer Important safety information 27 Description of the appliance 28 The control panel 28 Before use Setting the water softener Rinse aid 29 29 31 Using your appliance Loading your appliance Adjusting the height of the upper basket Use of detergent 32 32 33 34 Hints and tips 35 Washing programmes 36 Operating sequence 37 Maintenance and cleaning Internal cleaning Cleaning the central filter Cleaning the large filter External cleaning Prolonged periods of
Important safety information It is most important that this instruction book should be retained with the appliance for future reference. Should the appliance be sold or transferred to another owner, or should you move house and leave the appliance, always ensure that the book is left with the appliance in order that the new owner can get to know the functioning of the appliance and the relevant safety information. This information has been provided in the interest of your safety.
Description of the appliance 1. Water hardness adjustment 2. Levelling spacers 3. Upper basket stop 1 4. Salt container 2 5. Lower spray arm 3 6. Detergent dispenser 7. Control panel 8. Rating plate 4 9. Rinse aid dispenser 5 11 6 10 13 12 10. Large filter 11. Central filter 9 12. Upper spray arm 13. Upper basket 8 7 IN85 The control panel 1 2 3 4 1. On/Off pushbutton 2. Programme guide 3. Programme marker 4.
Before use Before using your dishwasher for the first time: 1. ensure that the electrical and water connections comply with the installation instructions 2. remove all packaging from inside the appliance 3. set the water softener 4. pour 1 litre of water inside the salt container and then fill with salt 5. fill the rinse aid dispenser.
Filling with salt Only use salt specifically designed for use in dishwashers. All other types of salt not specifically designed for use in dishwasher, especially table salt, will damage the water softener. Only fill with salt just before starting one of the complete washing programmes (not the Rinse and Hold programme). This will prevent any grains of salt or salty water, which may have been spilled, remaining on the bottom of the machine for any period of time, which may cause corrosion. To fill: 1.
Rinse aid Rinse aid is automatically added during the last rinse, ensuring thorough rinsing, spot and streak free drying. The dispenser, which is positioned inside the door, holds about 110 ml of rinse aid, which is sufficient for 16 - 40 dishwashing programmes, depending upon the dosage setting. Filling with rinse aid 1. Open the container by turning the lid (A) anticlockwise. 2. Add the rinse aid until the container is completely full. The indicator (B) will be completely dark. A 3.
Using your appliance Loading your appliance Before placing dishes in the machine, remove any scraps of food, to avoid clogging the filters and consequently reducing the performance. Do not load very small items which can fall through the baskets. The lower basket The lower basket is designed to take saucepans, lids, plates, salad bowls, cutlery etc. Serving dishes and large lids should be arranged around the edge of the basket, ensuring that the upper spray arm can turn freely.
The upper basket The upper basket is designed for plates (dessert plates, saucers, dinner plates of up to 24 cm in diameter), salad bowls, cups and glasses. Arrange items on and underneath the fold-down cup racks so that water can reach all surfaces. Light items (plastic bowls etc.) should be loaded in the upper basket and arranged so they do not move. Before closing the door, ensure that the spray arms can rotate freely.
Use of detergent Only use detergents specifically designed for use in dishwashers. If using powder detergents proceed as follows: Min = 15 g Max = 30 g D 1. Open the dispenser lid by pulling the catch (D). 2. Add the detergent according to the recommendations in the programme chart. As all detergents are not the same, you should also consult the instructions on the packet. 3. Always close the lid. 4. If the programme has a prewash add the required detergent over the lid of the dispenser.
Hints and tips To save energy Items not suitable for dishwashers Place dishes in the machine immediately after every meal and wait until the dishwasher is full before washing. If necessary run the Rinse and Hold programme (see "Washing Programmes" chart) so that any food scraps do not become caked on the dishes while you are waiting to run the complete wash programme. Do not prewash dishes under running water.
Washing programmes Programme Degree of soil and type of load Normal 65°C Normal soil. with Crockery and cutlery prewash 50°C Rinse and Hold Recommended quantity of detergent in the dispenser on the dispenser lid 1 On/Off 25 g 5g 2 On/Off 25 g / Light soil. Crockery and party crockery 3 On/Off 25 g / Any. Partial load (to be completed later in the day). 4 On/Off / Normal 65°C Light soil.
Operating sequence 1. Check the filters 10. At the end of the washing programme Ensure they are clean and properly positioned (see "Maintenance and cleaning"). 2. At the end of the programme the dishwasher will automatically stop. Check that there is rinse aid and salt 11. Switch off the dishwasher Switch off the dishwasher by opening the door and pressing the On/Off pushbutton. 3. Load the dishes Remove any scraps of food.
Maintenance and cleaning Internal cleaning Ensure that the seals around the door, the detergent and rinse aid dispensers are cleaned regularly with a damp cloth. We recommend every 3 months to run a 65°C wash programme without dishes using detergen. Cleaning the central filter (After each wash) Scraps of food may accumulate in the drain filter (A) and should be removed by rinsing the filter under running water. To remove the drain filter - simply pull it out by the handle.
External cleaning Clean the external surfaces of the machine and control panel with a damp soft cloth. If necessary use only neutral detergents. Never use abrasive products, scouring pads or solvent (acetone, trichloroethylene etc....). Prolonged periods of non-operation If you are not using the machine for any period of time you are advised to: 1. Unplug the appliance and then turn off the water. 2. Fill the rinse aid dispenser. 3. Leave the door ajar to prevent the formation of any unpleasant smells. 4.
Something not working Certain problems are due to lack of simple maintenance or oversights, which can be solved easily without calling out an engineer. Before contacting your local Service Force Centre, please carry out the checks listed below. Symptom The machine will not start Solution ● ● ● The machine does not fill with water ● ● ● ● The door has not been properly closed. The plug is not properly inserted in the power socket. There is no current at the socket. Ensure the water tap is open.
If after all these checks, the problem persists, contact your local Service Force Centre, quoting the model and serial number. This information can be found on the rating plate located on the right hand side of the dishwasher door (see picture). Prod.No. ........ Ser. No. ......... Mod. ........ RA01 Service and spare parts This product should be serviced by an authorised Service engineer, and only genuine spare parts should be used.
Hints for test centres Before starting any test it is necessary to fill completely with salt the salt container and with rinse aid the rinse aid dispenser.
Installation instructions Any electrical work required to install this appliance should be carried out by a qualified electrician or competent person. Any plumbing work required to install this appliance should be carried out by a qualified plumber or competent person. Remove all packaging before positioning the machine. If possible, position the machine next to a water tap and a drain. Water supply connections This dishwasher may be fed with either hot (max. 60°C) or cold water.
Water outlet hose connection The end of the drain hose can be connected in the following ways: 2 18 Ø Ø 21 min 4 cm 1 1. To the sink outlet siphon, securing it if necessary with a clip. min 30 cm max 100 cm 2. To a stand pipe provided with vent-hole, minimum internal diameter 4 cm. The waste connection must be at a height of between 30 cm (minimum) and 100 cm (maximum) from the bottom of the dishwasher.
This dishwasher is designed to be fitted under a kitchen counter or worksurface. It is essential that the recess dimensions indicated in the diagram are followed. No further openings for venting of the dishwasher are required, but only to let the water fill and drain hose and power supply cable pass through. A distance of 2 mm should be allowed between the top of the dishwasher and the counter top.
The furniture door The door on this appliance is designed for the overlay of a panel having the following dimensions: 596 mm 644 - 724 mm max 20 mm max 2 - 7.5 kg max 596 max 187 Width Height Thickness Weight The height of the panel depends on the height of adjacent kitchen units (see kitchen plinth adjustment). = The panel height should be no more than indicated, otherwise complete opening of the door will not be possible as the furniture door panel will hit against the dishwasher plinth.
Fitting the vapour protection 600 mm Fit the adhesive protection foil onto the front part of the worktop, along the entire width. Kitchen plinth adjustment II21 To allow correct opening of the door it is sometimes necessary to cut the kitchen plinth. Refer to the cutting table. According to dimensions (a) and (b) as shown on the figure, you will find on the following table the depth (x) of the cut to be made on the plinth.
Total Chlorine free 152988 68/0 es en 0/0699
