User manual

ENGLISH

Operating sequence

Before starting up for the first time it is advisable lo

load a few moist cloths into the dryer and to let it run

for about 20 minutes. This ensures that no dust and

dirt is left in the drum.

1. Load the laundry

Open the door by pulling the catch forwards.

Load the items one at a time, shaking them out

loosely and close the door.

Please check the laundry does not get caught

between the door and filter.

2. Select the drying time

Turn the selector dial clockwise to the desired time,

in the high or low temperature section, depending on

the laundry: the mains-on light illuminates and the

machine starts operating.

100

M0045S

P0305

3. When drying is completed

The machine stops automatically, the mains-on light

goes out.

If the laundry is still too damp, select a further brief

drying time, bearing in mind that during the last 10

minutes the dryer carries out the cooling and anti-

crease treatment phase.

Clean the filter after every drying programme.

A clean filter ensures correct functioning of the

appliance.