User manual

ENGLISH

Something not working?

If, after the above checks, there is still a fault, call

your local Service Centre.

Please make sure you give the model and serial

Before contacting your local Service Centre, please make the following checks:

Problem Possible cause

• The dryer does not work:

• The door(s) is(are) open.

• The plug is not fitted into the wall socket.

• There is no electricity supply from the wall socket.

• The selector dial is not set correctly.

• The water reservoir is full or not correctly inserted.

• The start button has not been depressed.

• The dryer does not dry properly:

• The filters are clogged.

• The condenser is clogged.

• The water reservoir is full.

• The selected cycle is not suitable for the laundry.

• Insufficient drying time.

• The laundry has not been spun properly.

• The low temperature function has been selected.

• Excessive laundry load.

• The dryer is not correctly installed.

number of the appliance.

This information can be found on the rating plate

(see picture on page 4 ).

125992222.qxp 2005-02-10 14:33 Page 13