Manual

The Corbin S-P RESS works with these dies:
R Corbin type -S Bullet Swage Dies (1-inch body, 5/8-24 shank). Die
fits the ram, punch used in floating punch holder. Self-ejection.
R Corbin type -M Bullet Swage Dies (7/8-inch body, 5/8-24 shank).
Die fits the ram, punch used in floating punch holder. Self-ejection.
R Corbin type -R Bullet Swage Dies (7/8-14 threads, button/T-slot
punch). Die fits press head, punch fits reloading adapter.
R Corbin type -R Draw Dies (7/8-14 threads, botton/T-slot punch).
Die fits press head directly, punch fits reloading adapter.
R Corbin type -S or -M Draw Dies (7/8-14 threads, 5/8-24 tpi punch).
Die fits press head directly, punch screws into ram.
R RCBS-type reloading dies (7/8-14 threads, button/T-slot shell
holder). Dies fit press head directly, punch fits reloading adapter in
the ram
R All other Corbin dies whose catalog number ends in -S will work in
the S-PRESS (use the short stop pin with slotted punches, long
ejection pin for all other punches)
Bullet swage dies have both an internal and an external punch. The internal
punch stays inside the swage die during operation. The external punch is used
to push components into the die and apply pressure to them. The FPH-1-S
floating punch holder is used to position the external punch for different weights
and lengths of bullets with the same set of dies.
The stop pin, in the front of the press, passes through the ram and stops the
downward movement of the internal punch causing automatic ejection. Point
forming dies have a long internal punch head pinned through a hole, so that the
punch does not move with the ram.
Most other swage dies use a punch that
travels with the ram, and simply rests on
the stop pin during the last part of the
down stroke (to eject). The
internal point form punch
was previously made with
a slot in the head. The new
stronger style uses a hole through the
punch head. When using the older
style punches (with a slot), use the
short stop pin. All other times, use
the long stop pin.
Catalog No. CSP-1
All-Steel
High pressure
Roller bearing
Bullet
Swaging
and
Reloading
Press
S-P RESS
from
Hand built
by
American
Machinists
in the
USA
Stop pins
Ram pin
CORBIN PO Box 2659, White City, OR 97503 USA
www.Corbins.com [e-mail] 541-826-5211 9am-5pm Mon-Thur.
The NEW