Installation Guide

INSTALLATION
 Insert the quick connector (II) into
the back of the fixture pan (BB).
 Attach the black supply wire to the
black quick connector (II) wire using
a wire nut (DD).
 Attach the white supply wire to the
white quick connector (II) wire using
a wire nut (DD).
 Connect the fixture ground wire and
the supply ground wire together
using a wire nut (DD).
 Wrap all wire connections with
electrical tape for a more secure
connection.
 Carefully tuck all the wires and wire
connections into the outlet box.
 Align the fixture pan (BB) over the
outlet box and feed the mounting
screws (GG) through the holes on
the fixture pan (BB) and into the
outlet box.
 Tighten the mounting screws (GG)
so that the fixture pan (BB) is
secured flush against the ceiling.
1A
2A
4
NOTE: If you have electrical
questions consult your local
electrical code for approved
grounding methods.
II
DD
BB
BB
GG