Installation Guide

OUTDOOR FLUORESCENT WALL FIXTURE
INSTALLATION INSTRUCTIONS
Please read carefully and save these instructions, as you may need them
at a later date.
________
CAUTION
Turn off the main power at the circuit breaker before installing the fixture, in
order to prevent possible shock.
_________
GENERAL
All electrical connections must be in accordance with local and National
Electrical Code (N.E.C.) standards. If you are unfamiliar with proper
electrical wiring connections obtain the services of a qualified electrician.
Remove the fixture and the mounting package from the box and make sure
that no parts are missing by referencing the illustrations on the installation
instructions.
____________________________
ASSEMBLY AND INSTALLATION
1. Pull the power supply wires out from the outlet box (1).
2. Make the following wiring connections using the provided wire
nuts (8):
White (-) supply wire (2) to white fixture wire (3)
Black (+) supply wire (4) to black fixture wire (5)
Supply ground wire (6) to fixture ground wire (7)
3. Place the back plate (9) over the outlet box (1), aligning the
mounting slots with the holes in the outlet box (1). Secure the
back plate (9) to the wall using the provided mounting screws
(10).
4. Place the diffuser (11) and the cage (12) onto the fixture back
plate (9) and them by using the cage screws (13).
INSTALLATION IS NOW COMPLETE.
1. Outlet Box
2. White Supply Wire
3. White Fixture Wire
4. Black Supply Wire
5. Black Fixture Wire
6. Supply Ground Wire
7. Fixture Ground Wire
8. Wire Nuts
9. Back Plate
10. Mounting Screws
11. Diffuser
12. Cage
13. Cage Screws
1
2
3
6
7
5
4
8
10
13
9
11
12