UT5000 Thickness Gauge INSTRUCTIONS NS FOR SAFE OPERATION A II 2 G Ref. ID 2310, Rev. A Email: sales@cord-ex.com www.cordexinstruments.
CONTENTS 1. READ THIS FIRST Safety Information Faults and Damage Safety Regulations Batteries Calibration 2. EXCHANGING BATTERIES 1. READ THIS FIRST 1 1 1 1 1 1 2 The CorDEX UT5000 thickness gauge is a gauge for measuring the wall thickness of pipes or tanks. Read and understand all Warnings and Cautions before using this product. SAFETY INFORMATION This instruction manual contains information and warnings that must be observed for safe operation under the conditions described. FAULTS AND DAMAGE 3.
2. EXCHANGING BATTERIES Batteries are inserted into the compartment in the bottom side of the instrument. To change the battery: 1. Half turn the screws on the compartment cover and then carefully lift the cover. 2. Make sure that the rubber sealing of the cover will not be damaged or removed from the guiding notch. 3.
ATEX CERTIFICATION 4. CERTIFICATION UT5000 Model: ate No: Baseefa11ATEX0114 Sira 08ATEX1293X 0518 II 2 G ate No: IECEx BAS 11.0094 Ex d IIC T4 Gb II 2G 0518 IM2 Ex d IM b Ex ib IIC T4 Gb USB Terminal parameter: Um 253V Ambient Temperature: Tamb -10°C to +50°C Power Supply: 1x CorDEX Instruments Battery Part Number : CDX5000-327 EC DECLARATION OF CONFORMITY 0518 We hereby conĮrm the conformity of the equipment listed below with the dir es of the Council of the European Community.
ATEX CERTIFICATION IECEx CERTIFICATION ***Certificate here*** 6 Ref. ID 2310, Rev.
IECEx CER TIFICATION 8 IECEx CERTIFICATION Ref. ID 2310, Rev.
distributed by UK Headquarters: Cordex Instruments Ltd Unit 1 Owens Road Skippers Lane Industrial Estate Middlesbrough Cleveland TS6 6HE Copyright © 2011, CorDEX Instruments Limited. All other brand and product names are trademarks of CorDEX Instruments Limited. Ref. ID 2310, Rev.