User Manual
Take Down Instructions:
1
Prepare for Setup
∙ Select a level site clear of rocks, branches, and other
hard or sharp objects, to set up your tent.
• Remove all contents from bag.
• Unfold (4) leg poles
at the joints.
Model #40233
Tent
Contents & Repair Parts
Setup Tips
STITCH LINE
6 Person Performance Instant Tent
10ft x 9ft x 72in
2 People Rubber Mallet Level Area
Need some help?
1-888-775-5628
coreequipment.com
2
Lift Up Arm Joints
NOTE: 2 people will be needed to
erect and extend the tent poles.
∙ Lift up on arm joints (fig. 1) until
roof poles angle upward at joints
and tent partially stands up.
3
Extend Leg Poles
4
Stake Tent
NOTE: DO NOT extend telescoping poles until all
legs and ceiling hubs are elevated.
• Extend each of the (4) leg poles until the locking
buttons “click,” and lock the poles into place
(fig. 2).
• Rotate short eave arms to open position (fig. 3).
• For a comfortable night’s rest, clear your camp area of debris
before setting up your tent.
• When opening for the first time, the rainfly is rolled together with
the tent body.
• Lay out all of the contents of the bag and assemble all tent
poles before setting up your tent.
• For best results in windy conditions, position narrow end of tent
into the wind.
• Secure with all stakes and guylines provided to prevent property
damage or personal injury.
WARNING: KEEP ALL FLAME AND HEAT SOURCES AWAY FROM
THIS TENT FABRIC
This tent is made of flame-resistant fabric which meets CPAI-84
specifications. IT IS NOT FIREPROOF. The fabric will burn if left in
continuous contact with any flame source. The application of any foreign
substance to the product fabric may render the flame-resistant
properties ineffective.
DO NOT use fuel burning devices inside or near tent materials.
DO NOT permit children to light matches, operate burning appliances or
handle any flame sources in or near the tent.
• Do not smoke, use matches, candles or open flames of any kind in or
near the tent.
• Do not refuel lanterns, stoves or heaters inside tent.
• Do not cook inside tent.
• Do not store flammable liquids inside tent.
WARNING: Keep clear of overhead power lines.
• Do not set up your tent under trees because of potential
lightning strikes or falling tree limbs in inclement weather.
• For best results in windy conditions, position narrow end of tent
into the wind.
• Secure with all stakes and guylines provided to prevent property
damage or personal injury.
• Under certain conditions (cold weather, high humidity, etc.)
condensation will form on the inside of your tent. Condensation is
caused by water vapor from your breath, perspiration or any wet
clothing inside the tent. It is NOT LEAKAGE through the tent fabric. It
can be minimized by removing wet clothing from your tent and by
providing good ventilation throughout the tent. Never store the tent,
even for a short period of time, without drying it thoroughly and
brushing off caked dirt.
• Do not pack stakes inside your tent. Use a separate storage bag.
• STAKES SHOULD BE REMOVED BY PULLING ON THE STAKE
ITSELF. NEVER PULL ON THE TENT TO REMOVE STAKE.
• Do not leave your tent setup for weeks at a time. Be aware that
exposure to ultraviolet rays from the sun can seriously damage
material and/or cause it to become discolored.
IMPORTANT:
THE ORIGINAL FIRE RETARDANT AND WATER-REPELLENT PROTECTIVE
COATINGS MAY BE COMPROMISED IF SPRAYS OR OTHER CHEMICAL
TREATMENTS ARE USED ON THE TENT. FABRIC HAS BEEN FACTORY
TREATED. IT IS HIGHLY WATER-REPELLENT; HOWEVER, IT IS NOT
WATERPROOF. ALL TENTS CAN EXPERIENCE SEAM LEAKAGE DURING
WET WEATHER. IF YOU WANT ADDITIONAL MOISTURE PROTECTION,
TRY A SEAM SEALING COMPOUND ONLY; STRICTLY FOLLOW THE
MANUFACTURER’S DIRECTIONS. IT IS RECOMMENDED THAT YOU SEAL
THE TENT DURING THE INITIAL SETUP AS WELL AS PRIOR TO EACH
CAMPING SEASON. SEAM SEALER COMPOUNDS CAN BE PURCHASED
AT YOUR LOCAL CAMPING PRODUCTS OUTLET.
PLEASE DO NOT RETURN THIS PRODUCT TO THE RETAIL STORE.
DO NOT SPRAY!
Warnings and Cautions:
Revised 4/22/22
STITCH LINE
LOCKING
BUTTON
fig. 2
fig. 1
• You can now easily move your tent to its final position before
installing the rainfly.
• Drive stakes at a 45º angle through web loop at base of tent
to secure to ground (fig. 4).
• Floor of tent should be taut when
staked properly.
fig. 4
5
Attach Rainfly
fig. 3
fig. 7
fig. 8
fig. 5
45˚
We Recommend...
6
Stake Rainfly,
Secure Ground Vents
and Guylines
• Remove guylines from green guyline pockets
located on rainfly.
• Stake out each guyline at a 45 degree angle
(fig. 8).
• Tighten guylines as needed by adjusting the
slider up the cord.
• Stake out ground vent on back side of tent
(where air intake graphics are).
• Stake out webbing loop under front door
to improve zipper opening/closing.
• Are replacement parts available? Yes, just call Customer Service at
1-888-775-5628 for replacement parts. All parts can be replaced.
• How do I get everything back in the bag? The trick is to take your
time and remove all the air. Use the weight of the poles to roll the tent
on the ground and force air out.
• What are the ground vents? The ground vents are designed to help
with air flow throughout the tent, which keeps the tent cooler
in warm weather and prevent condensation. It can be staked shut in
colder weather.
• How to clean the tent? Clean the tent with a soft sponge, mild soap
and tepid water. Be sure to scrub gently and remove all soap. Let dry
in sunlight, which also naturally cleans the tent.
• What is the wall plug symbol? That is a port for an electrical
cord to access your tent. The electrical cord can be used on a
campsite with power or with a generator outside your tent. It closes
fully when not in use.
• Can the tent be used in the rain? Absolutely. The tent and
rainfly have a water resistent treatment, and the seams have been
sealed with water resistent tape at the factory.
• How many seasons is this tent? This is a 2-3 season tent, not
recommended for use in severe weather conditions.
• What are the dimensions of the tent? The tent is 10’ x 9’ x 72”
(3.05m x 2.74m x 1.83m).
Frequently Asked Questions:
CORE
®
Equipment and Elevate LLC warrants, for a period of one year
from the original date of purchase, this product against any defects in
materials or workmanship. At its discretion, CORE
®
Equipment may
provide replacement parts to original purchaser. Original receipt or
proof of purchase as well as proof of defect in the form of a photograph
or video is required. CORE
®
Equipment will not be responsible for
shipping costs incurred outside the continental USA. Warranty is valid
for the original purchaser one year from the date of purchase and is
not transferable.
This warranty does not cover any product purchased through
unauthorized dealers/distributors and/or unauthorized resellers on
online auction websites. CORE
®
uses approved and authorized
distributors to furnish quality products, and CORE
®
provides warranty
coverage only on products purchased from those distributors. If the
product was purchased from an unauthorized reseller, this warranty
does not apply. Unauthorized resellers may sell products that are used,
defective, counterfeit, or which may not be designed for use in that
specific country. To determine whether the seller of a CORE
®
Equipment product is one that has been approved and authorized by
Elevate LLC owner of the CORE
®
Equipment brand, please contact
help@coreequipment.com or call customer service at 1-888-775-5628.
This 1-Year Limited Warranty does NOT cover normal wear and tear,
abuse or misuse of this product including damage from inclement
weather conditions, such as wind, rain or hail. In case of inclement
weather, remove all valuables and persons and seek appropriate
shelter. Under no circumstances will CORE
®
Equipment or Elevate LLC
be liable or responsible for any incidental or consequential damages.
This product is designed and intended for recreational use only.
Prolonged exposure to UV rays will cause any fabric to fade and
deteriorate and is NOT covered by this 1-Year Limited Warranty. All
replacement products or parts will assume the remaining warranty of
the original product. This warranty gives you specific legal rights. You
may also have other rights which vary from state to state. To obtain
Warranty Service: Call Toll Free 1-888-775-5628 for warranty service,
repair parts or product questions. Monday - Friday, 8:00 a.m. - 5:00 p.m.
Central Time.
1-Year Limited Warranty:
• Leave door unzipped during take down, to allow air to escape tent.
• Pull stakes from guylines and ground vent. Store in stake bag.
• Release hook and loop fasteners on the underside of rainfly from poles.
• Remove short eave arms from hook-and-loop pockets on the underside
of rainfly.
• Unbuckle rainfly, remove, and fold into thirds lengthwise. This will be
rolled up with the tent.
• Unlock the (4) telescoping leg poles and push down on the arm joints
to collapse.
• Fold all of the collapsed poles to the center of the tent.
• Gather folded tent poles and fabric into the center to form a pod,
compressing to release any air left in tent.
• Store in carry bag with bag of stakes.
fig. 6
∙ Drape rainfly over tent, placing “CORE” to the front side of tent
with door. Two front corners have day-glo yellow webbing and
buckles to help orient rainfly.
• Insert ends of short eave arms into hook-
and-loop pockets on underside of rainfly (fig. 5).
• Fasten rainfly on all four corners using
buckles (fig. 6).
• Attach all hook-and-loop tabs on the underside
of the rainfly to roof and leg poles (fig. 7).
Made in Bangladesh • Printed in Bangladesh
Distributed by Elevate LLC.
8681 West 137th Street
Overland Park, KS 66223 USA.
©2022 Elevate LLC. All rights reserved.
CORE is a trademark owned by Insight 2 Design LLC and Elevate, LLC.
Stakes x 11
(90004)
Hanging Organizer
(92092)
Rainfly (92094)
Telescoping Leg Poles x 4 (92089)
Corner Roof Poles x 4 (92090)
Carry Bag
(92095)
Reflective
Guyline x 4
(91220)
Center Hub (92084)
Corner Joint
(92086)
R
Y