GET STARTED E300 Mini WiFi Range Extender / AP / Router
Overview 01 Package Contents.................................................... 01 Front Panel .............................................................. 02 LED Descriptions...................................................... 03 Using as an Extender 04 Connects to a WIFI network................................... 04 Acts as an access point for WIFI devices............. 04 Power on the E300................................................ 05 Connect to an existing WIFI network.....................
Overview The E300 WiFi Range Extender is a network device with multifunction, which can be using for increasing the distance of a WiFi network by boosting the existing WiFi signal and enhancing the overall signal quality over long distances. An extender repeats the signals from an existing WiFi router or access point. The E300 WiFi Range Extender also can be used as an Access Point.
Front Panel Before you install your extender, familiarize yourself with its LEDs, buttons, and port.
LED Descriptions Power/WPS LED Lit. Power on. Blinking. A WPS connection is being established. OFF. Power is not supplied. WAN/LAN LED Blinking Fast. The port is sending or receiving traffic. Off. No Ethernet cable connected. LAN LED Blinking Fast. The port is sending or receiving traffic. Off. No Ethernet cable connected.
Using as an Extender The extender works like a bridge between a WIFI router (or an access point) and a WIFI device out of the range from WIFI router. The extender performs two main jobs: Connects to a WIFI network When the extender connects over WIFI to an existing network, it functions as a network client, similar to one WIFI device connects to a network. Acts as an access point for WIFI devices The extender broadcasts its own signal that WIFI devices can join.
1 Power on the E300 Switch the power button “ON” & the mode button to “Repeater” on the side of the E300. Plug the E300 into an electrical outlet which next to your WIFI router. The E300 plugged in the proximity of the WIFI router only for the initial setup process.
2 Connect to an existing WIFI network To extend the range of your WiFi network, you must connect the extender to your existing WiFi network. You can do this in one of two ways: Method 1. Connect with a web browser. Method 2. Connect with WPS. (more details on page 08) Method 1: Connect with a web browser 1. Once connected, visit: http://extenderlogin.com. When prompted, set your own password for the admin page twice.
2. Click “Wizard”& choose the your router SSID, fill in the Wi-Fi Password of your router, then click “Connect”. If the wireless Network list could not load completely or successful, please click to refresh. Repeater Wizard Connect to: ASUS Wi-Fi Password: E300_EXT E300 SSID: Connect Select a Wi-Fi Manually enter ASUS XXXXXX XXXXXX Home Wizard Wi-Fi Settings 3. It is around half a minute to reboot the E300.
Method 2: Connect with WPS Wi-Fi Protected Setup (WPS) lets you join a secure WiFi network without typing the network name and password. Note: WPS does not support WEP network security. 1. Press the WPS button on the front panel of the E300 around 6 seconds. Release the button, then the WPS LED blinks. 2. Within two minutes, press the WPS button on your router or access point. 3.
Connect an Ethernet-enabled Device After the E300 connected to your existing WIFI network successful, you can connect a wired device to the E300 by using an Ethernet cable. Then the device can access your existing network through the WIFI connection.
Using as an Access Point The E300 WIFI Range Extender also can be used as an Access Point. An access point receives internet data by wired Ethernet (such as hotel’s wired Ethernet), and converts into a 2.4GHz wireless signal. It sends and receives wireless traffic to and from nearby wireless clients.
1. Power on the E300 Switch the power button “On”& the mode button to “AP” on the side of the extender. Plug the extender into an electrical outlet. 2. Connect the E300 to your wired Ethernet port with Ethernet cable came with the E300. Prescitech LAN4 LAN3 LAN2 LAN1 WAN WAN/LAN Port 3. Use a WIFI network manager on a computer or smartphone (recommended) to find and connect to the E300 network “E300”.
4. Once connected, visit: http://extenderlogin.com. When prompted, set your own password for the admin page twice.(admin page not available? visit the troubleshoots on Page 16).
5. Click “Wizard”, choose the Security Type as “WPA/W PA2 Mix” (Recommend). Set up your own WIFI password & submit “Apply”. AP Wizard Wi-Fi SSID: E300 Security Type: WPA/WPA2 Mix Wi-Fi Password: xxxxxxxxxx Apply Home Wizard Wi-Fi Settings 6. It is around half a minute to reboot the E300. You can connect back the E300 by the password you set.
Other Settings Change the password of E300 1. Connect the E300 and visit the admin page by entering http://extenderlogin.com. 2. Fill in the password of admin page. 3. Click “Settings” >> “Login Password”. Input your current password & the new password you want to set twice. 4. Click “Apply” button, your change would be saved.
Hide extender’s wireless network You can hide the extender wireless network that which would not display in your client WIFI scanning list. Other people could not join the wireless network if they do not have your wireless network SSID even they get the password of the wireless network. This function ONLY works for AP mode. 1. Connect the E300 and visit the admin page by entering http://extenderlogin.com. 2. Fill in the password of admin page. 3. Click “Wi-Fi” >> “SSID & Password”.
Troubleshoots 1. How to find out the suitable location for my E300? The location that you choose must be within the range of your existing WIFI router network. Use the WLAN LEDs to help you choose a spot where the extender-to-router connection is optimal. If only the WLAN LED 1 & 2 lit, plug the extender into an outlet closer to the router and try again. Keep moving the extender to outlets closer to the router until all 3 WLAN LEDs lit.
2) If you are using the computer/laptop to setup the E300, and the E300 has been reset into its default setting ever before. Please clear the browser caching & wait around half of minute. Or you can change another browser to try, refresh several times. We recommend you using the smartphone to setup the E300, that would be less effected by your internet environment setting. 3.
Model: E300 E300 Mini WiFi Range Extender / AP / Router US COST FREE Tech Support: 800-213-1134 (PST Mon-Sun 06:00-24:00) UK COST FREE Tech Support: 800-970-3063 (GMT Mon-Sun 14:00-08:00) Website: www.prescitech.com E-Mail:support@wifiextendersupport.com V6.