BTSHS01 Bluetooth Stereo Headset User Manual
Contents BTSHS01 User Manual 1. Before Starting........................................................................................................... 2 2. Product Introduction............................................................................................... 3 2.1 Features................................................................................................ 3 2.2 Package Contents..............................................................................3 2.
1 Before starting BTSHS01 User Manual 1. For the first time using, it takes 4 hours to fully charge the batteries and 2 hours afterwards. After the batteries were fully charged, talking time is up to 8 hours and the standby time is up to 160 hours. For further information, please refer to the Battery Charging chapter in this manual. 2. The product configurations are based on Bluetooth stereo adapter and mobile phone. For other Bluetooth devices, please refer to the brand manuals. 3.
2 Product Introduction BTSHS01 User Manual corega BTSHS01 is a Bluetooth 1.2 standard headset, with the included Bluetooth audio adapter, it can be used on any audio device which has a 3.5mm audio output, such as personal stereo, TV, DVD player, MP3 player and iPOD etc.. This headset is also compatible with Bluetooth mobile phones. It supports auto music/phone switching function, so you will not miss out any phone call while you are listening music.
BTSHS01 User Manual 2.3 Hardware Description [Right] [Left] Pairing Track Wheel Button Microphone Charging Port Play/Pause/Answer /Hang-up Button Volume Button [Front view] Power Switch/Pairing Button Charging Port 2.4 Product Configuration . . . . . . .. e e MP3 Player with BTSAP01 Bluetooth Audio Adapter e e e e e e e e Laptop with BTSAP01 Bluetooth Audio Adapter 4 e e e e . . ..
BTSHS01 User Manual 2.
Charging Batteries BTSHS01 User Manual 3 For the first time using, it takes 4 hours to fully charge the batteries and 2 hours afterwards. After the batteries were fully charged, talking time is up to 8 hours and the standby time is up to 160 hours. (* Various usage patterns may adversely affect battery performance) The following figure is the Battery Charging instructions: 1. Connect the T-Connector to the power adapter 2. Connect the stereo headset to the T-Connector 3.
4 Start Using BTSHS01 User Manual The followings are pairing modes and sequences for the stereo headset: 4.1 Headset ---> Stereo adapter (Pairing --->) 4.2 Headset ---> Mobile phone 4.3 Headset ---> Stereo adapter then Headset ---> Mobile phone 4.4 Headset ---> Other Bluetooth devices 4.1 Use with audio devices (1) Power On Use the power switch to turn on the power. *Note: Turn the switch to [OFF] to switch off the headset. (2) 3.5mm audio connector Plug the audio connector into the 3.
BTSHS01 User Manual (3) Pairing a. When Power is On, press and hold the pairing track wheel on the stereo headset until the blue and red LEDs flash alternatively. b. When Power is Off, press and hold the control button on the stereo adapter until the blue and red LEDs flash alternatively. c. When both headset and stereo adapter’s Blue LEDs start to flash three times, then the pairing is completed. *Note: 1.
BTSHS01 User Manual (5) Adjusting Volume 1. Adjusting Headset Volume Press [Vol.+] to increase the volume, [Vol.-] to decrease the volume. Vol+ Vol- *Note: It is recommended to adjust headset volume once the pairing is completed, since default volume may be slightly quiet. 2. Set volume mode 《Normal volume mode》 - When power is on, press and hold the control buttons on the stereo adapter for 1.5 seconds to disconnect the stereo adapter from the audio device.
BTSHS01 User Manual 《High volume mode》 - When power is on, press and hold the control buttons on the stereo adapter for 1.5 seconds to disconnect the stereo adapter from the audio device. Then you will hear a ‘DoDo’ sound from the headset. - Double clink on the control button will reconnect the stereo adapter to the audio device ans set the stereo headset to high volume mode. 1.5 secondes Double click *Note: - For iPOD, normal mode is preferred.
BTSHS01 User Manual (2) Pairing a. Press and hold the pairing/track wheel button on the stereo headset until blue and red LEDs are flashing. b. To properly perform pairing procedure on your mobile phone, please refer to the manual of your mobile phone for its own pairing instruction. This device name is set to be [CG-BTSHS01]. If you are asked to enter pin-code during pairing, please enter [1234]. *Note: 1. If the pairing is unsuccessful, the BLUE LED is then flashing.
BTSHS01 User Manual (3) Adjusting Volume 《Adjusting Headset Volume》 Press [Vol.+] to increase the volume, [Vol.-] to decrease the volume. Vol+ Vol- (4) Starts Headset phone 《Make a call》 - Dial out the number from your mobile phone. - Voice is automatically transferred to the headset. 《Receive a call/End a call》 - When there is an incoming call, a ‘DoDo’ sound is appeared from headset. Press the answer button to answer the call and the audio channel will be switched to the mobile phone.
BTSHS01 User Manual 《Reject a call 》 - Press and hold the Vol- button of the headset for around 3 seconds. (This function may not work on some Bluetooth mobile phones) 4.3 Use with stereo adapter and phone The pairing sequence is: 1. Headset with Stereo Adapter 2. Headset with Bluetooth mobile phone 4.4 Use with other Bluetooth Devices This headset can also connect with other Bluetooth devices, such as USB Bluetooth dongle, Bluetooth PDA etc..
BTSHS01 User Manual (4) Start pairing a. Double clicks on the icon, like the figure shown below b. Press and hold the black track wheel button on the headset until RED and BLUE LEDs are flashing alternatively. Double clicks on the icon below: c. Then a message box is pop up from right bottom corner, please click on the message box.
BTSHS01 User Manual d. When the password request box is shown, please enter the password [1234]. Then the pairing is completed. *Note: If the pairing is unsuccessful, the BLUE LED is then flashing. Please repeat the step 3 and 4 until the pairing is completed. (5) Start using headset 《Adjusting Headset Volume》 Before start using the headset, please adjust the headset volume first. For the detail, please refer to 4.1 (5).
FAQ BTSHS01 User Manual 5 1. Can I change Bluetooth passkey? No, the Bluetooth is written into the device when it manufactured and cannot be changed. 2. Can I use stereo headset with audio device and mobile phone at same time? Yes, the stereo headset can be used with audio device and mobile phone at same time. However, there could be some compatibility issues on certain brands of models of mobile phones. 3.
BTSHS01 User Manual 8. When my mobile phone was searching for the headset, why did several Bluetooth devices appear on my mobile phone? The headset will appear as “CG-BTSHS01” on your mobile phone after having been found by your mobile phone. 9. Why doesn’t the headset work suddenly? 1) The headset may have run out of battery. When it is in low battery, a red LED will start to flash. 2) When this happens, please restart your mobile phone. (It is not necessary to perform Pairing again.) 10.
Specification BTSHS01 User Manual 6 Standard Bluetooth Profile Frequency RF Output Power Receiving Sensitivity Stereo Adapter:A2DP 2.4GHz~2.
7 Compatible Phone List BTSHS01 User Manual Compatible Mobile Phone List Brand Model Nokia 3650 6230 6310i 7280 7610 Motorola E398 V501 V525 V600 V80 Sony Ericsson K700i S700i T610 T616 T618 Brand Model Panasonic X700 Dopod 565 N-Gage T630 Z600 Brand Simens 585 T637 700i P900 Model S55 SX1 818 *For the latest information of compatible mobile phones, please visit www.corega-asia.com or www.corega.com.
memo
memo
