Dual-stream IP Camera User Manual

35
CG-WLNCM4G User Manual
Move the “Threshold” slide bar to adjust the sensitivity level of motion
detecting. When the level is set low, even slight motions can be
detected (A). When the level is set high, only big and obvious motions
can be detected (B).
Make sure to click [Save] to save the settings when you are done.
An image will be taken when a motion within the detection areas is
big enough to affect the horizontal sensitivity line. You can specify
what “event” will simultaneously be “triggered” in the next step at
“Motion Trigger” section.
(A) (B)