Dual-stream IP Camera User Manual

Advanced Settings

3.10 Advanced Configuration When the

Camera Is behind a NAT Router

If your camera is connected to a NAT router, you need to open a “Virtual

Server” port for the camera in the router to allow remote network

access. Here we use corega WLBARGMO wireless router as an example:

(as the image below)-.

Step 1: Select the IP address and name of the camera

Step 2: Select a service, for example, HTTP.

Step 3: Enter the port range. The recommended port range is 80~80.

If you have a second (or more) camera connected, you need to assign

a different port range (can not use 80~80 again) for it. Besides, the port

value has to be the same as the camera's HTTP port. (Please also refer

to chapter 3.2.1)

Step 4: Select a protocol. "TCP" is recommended.

Step 5: You can add product description in the “Remark” column

Step 6: Click [Submit] after you enter all the information. You will then

see the new entry in the Virtual Server list.

HTTP

80 80