Dual-stream IP Camera User Manual

NC Monitor

4.5.3 Camera Panel

TRIGGER OUT: The function is not available for CG-WLNCM4G.

SNAPSHOT: Click to capture a still image using the selected camera

and save the file in the computer. (To set the recording file path,

please go to “Setting” --> “Recording Configuration” --> “Recording File

Path”)

RECORD: Click to start recording a video clip using the selected

camera. Click again to stop recording and save the file in the

computer. (To set the recording file path, please go to “Setting” -->

“Recording Configuration” --> “Recording File Path”)

TALK: Click to allow the person at the camera’s location to hear

sounds and voices from your location. (You need to connect an

external speaker to the camera when using this function, as the

camera has no built-in speaker. Only one user is allowed to use this

function at a time). Please note that this button is only available for

cameras supporting 2-way audio (such as CG-WLNCM4G), and only

one user is allowed to use this function at a time.

LISTEN: Click to receive sounds and voices from each camera’s

location.