User Manual Network Adapter WLUSB2GO

WLUSB2GO Manual
10
1010
User can use corega Wireless Utility to configure wireless net-
work. After finishing configuration, please check if the connec-
tion works.
Please confirm that user’s computer is in the wireless radio wave
range. If the computer is out of the radio range, the setup will
not be seccessful.
After user installed CG-WLUSB2GO and corega Wireless Utility,
CG-WLUSB2GO will automatically link with the AP/Router. If the
connection is successful, the following message will appear .
1. Click the icon in the system tray to open the Utility. If there
is no such icon, enter [Start]->click[Program]->select[CG-
WLUSB2GO]->click[corega Wireless Utility] and the icon will
appear.
2. The available APs are displayed in the [Site Survey] tab. If there
is no AP in dialog box, please press [Rescan] .
4
Setting Wireless Network