User Manual

Installation
Page 13
DISPLAY CABLING DIAGRAM
Cintiq pen
display tablet
– B –
DVI or VGA
video card
Rear panel
of computer
Do not attach the USB data cable until instructed to do so.
Power adapter
– D –
To AC outlet
DVI-I connector
– E –
CAUTION
Make sure your video card has a DVI or VGA connector, and that you correctly set the
Cintiq DVI/VGA switch for the video connection you are using.
C
AUTION
Use only the converter unit and power adapter that came with Cintiq; use of an improper
converter or power adapter may damage the unit.
Do not connect or disconnect the video or power cables while Cintiq or your computer are
turned on – this can damage the display or computer video card.
Make sure that the display refresh rate does not exceed 75 Hz (60 Hz for WXGA).
– A –
– C –
DVI VGA
12WX_Manual.fm Page 13 Wednesday, August 29, 2007 10:38 AM