User's Manual

11
Turn on your computer.
Windows 98 and Me:
The
NEW HARDWARE WIZARD
will display. Insert the Wacom Tablet Driver CD and follow
the prompts selecting the default options. If prompted for the location of the files, be sure to check the box for the
CD-ROM drive.
Windows 2000 and XP:
Cintiq will automatically install as a Default Monitor. If you want Cintiq to be identified
as a Cintiq display and if you want to install the color calibration profile for Cintiq, follow the instructions below to
update the display driver for Cintiq.
– From the
CONTROL PANEL
folder open the
DISPLAY PROPERTIES
control panel.
– Select the
SETTINGS
tab. If you have more than one display, select the display for Cintiq then
click the
ADVANCED
button. Click the
IDENTIFY
button if you need help in determining
which display corresponds to Cintiq.
– Select the Monitor tab and click the Properties button.
– Select the
DRIVER
tab and click the
UPDATE DRIVER
button. The
HARDWARE UPDATE WIZARD
will display.
Windows 2000:
Insert the Wacom Tablet Driver CD. If the Wacom Tablet installation menu displays,
close it.
– Follow the prompts selecting the default options.
– If a signing warning dialog box displays, click
YES
to accept the driver. After the installation is
complete click the
FINISH
button to close the Wizard and then close the
DISPLAY PROPERTIES
control panel.
Windows XP:
Insert the Wacom Tablet Driver CD. If the Wacom Tablet installation menu displays,
close it.
– If the driver was not found, click the
BACK
button, then select the option
INSTALL FROM A LIST OR
SPECIFIC LOCATION (ADVANCED)
, and click
NEXT
.
– Select the option
DON’T SEARCH. I WILL CHOOSE THE DRIVER TO INSTALL
and click
NEXT
.
– Click the
HAVE DISK
button, enter the letter of your CD-ROM drive (e.g.,
E:\
), and click
OK
.
– If the
HARDWARE INSTALLATION
dialog box displays, click
CONTINUE ANYWAY
to accept the
driver. After the installation is complete, click the
FINISH
button to close the Wizard and then
close the
DISPLAY PROPERTIES
control panel.
As necessary, configure the monitor control panel settings for the proper size and color resolution. The maximum reso-
lution of Cintiq is 1600 x 1200, True Color (24 bit). The number of colors is constrained by the performance of your
computer or graphics card. Refer to the documentation of the manufacturer for details.
If you are using analog (VGA) mode, you may also want to fine-tune the display. Please refer to
LCD Display Adjust-
ment and Functions
on page 15 for more information.
For Windows,
if you are using Cintiq as a secondary display, you may first need to enable Cintiq in your Display Prop-
erties control panel.
After the display portion of Cintiq is working to your satisfaction, move on to the next section
Tablet soft-ware Installa-
tion for Windows and Macintosh.